On 2021-Jul-7, at 19:11, Mark Millard <marklmi at yahoo.com> wrote:
> On 2021-Jul-7, at 19:04, Mark Millard <marklmi at yahoo.com> wrote:
>
>> From: bob prohaska <fbsd_at_www.zefox.net> wrote on
>> Date: Wed, 7 Jul 2021 14:53:20 -0700 :
>>
>>> In trying to compile www/chromium under poudriere on a Pi3 there
>>> comes a point when five python2.7 sessions totaling more than 2 GB
>>> in size are running at once.
>
> I should have orignially noted right here that such is
> because of the use of: ALLOW_MAKE_JOBS=yes
>
> You need to avoid that for the www/chromium build.
>
>>> Obviously, swap is swamped and the Pi3
>>> is running at a crawl. It hasn't givem up, however.
>>>
>>> Poudriere was started with -J 2 and make is limited to 2 jobs.
>>> Is there an analogous limit to how many pythons are loosed at
>>> once? It looks like there's only one builder, so it isn't
>>> obvious that -J 1 would help; I'll try it if this job stops
>>> prematurely.
>>
>> It will not help. There were no competing build jobs.
>>
>>> Progress, such as it is, can be seen at
>>>
>>> http://www.zefox.org/~bob/poudriere/data/logs/bulk/main-default/2021-07-05_14h06m26s/build.html
>>
>> By the time I looked it had run out of swap space:
>>
>> Swapinfo 100.00%
>>
>> and had stopped for build/timeout after 50:33:26 .
>>
>> For reference, including "swap_pager: out of swap space"
>> and "swp_pager_getswapspace(1): failed":
>>
>> QUOTE
>>
>> Wed Jul 7 15:20:34 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1831744 11456 99%
>> /dev/mmcsd0s2b 1843200 1832328 10872 99%
>> Total 3686400 3664072 22328 99%
>> . . .
>> Wed Jul 7 15:20:46 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1838356 4844 100%
>> /dev/mmcsd0s2b 1843200 1838928 4272 100%
>> Total 3686400 3677284 9116 100%
>> . . .
>> Wed Jul 7 15:20:56 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1841260 1940 100%
>> /dev/mmcsd0s2b 1843200 1841836 1364 100%
>> Total 3686400 3683096 3304 100%
>> . . .
>> Wed Jul 7 15:21:08 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843000 200 100%
>> /dev/mmcsd0s2b 1843200 1843124 76 100%
>> Total 3686400 3686124 276 100%
>> . . .
>> Jul 7 15:20:58 www kernel: swap_pager: out of swap space
>> . . .
>> Wed Jul 7 15:21:20 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843128 72 100%
>> /dev/mmcsd0s2b 1843200 1843140 60 100%
>> Total 3686400 3686268 132 100%
>> . . .
>> Jul 7 15:20:58 www kernel: swap_pager: out of swap space
>> . . .
>> Wed Jul 7 15:21:30 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843160 40 100%
>> /dev/mmcsd0s2b 1843200 1843116 84 100%
>> Total 3686400 3686276 124 100%
>> . . .
>> Jul 7 15:20:58 www kernel: swap_pager: out of swap space
>> . . .
>> Wed Jul 7 15:21:45 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843192 8 100%
>> /dev/mmcsd0s2b 1843200 1843192 8 100%
>> Total 3686400 3686384 16 100%
>> Jul 7 15:20:58 www kernel: swap_pager: out of swap space
>> Jul 7 15:21:33 www kernel: swp_pager_getswapspace(3): failed
>> . . .
>> Wed Jul 7 15:22:05 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843192 8 100%
>> /dev/mmcsd0s2b 1843200 1843192 8 100%
>> Total 3686400 3686384 16 100%
>> Jul 7 15:20:58 www kernel: swap_pager: out of swap space
>> Jul 7 15:21:33 www kernel: swp_pager_getswapspace(3): failed
>> . . .
>> Wed Jul 7 15:48:46 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843192 8 100%
>> /dev/mmcsd0s2b 1843200 1843192 8 100%
>> Total 3686400 3686384 16 100%
>> Jul 7 15:21:33 www kernel: swp_pager_getswapspace(3): failed
>> Jul 7 15:48:44 www kernel: swp_pager_getswapspace(1): failed
>> . . .
>> Wed Jul 7 15:57:01 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843192 8 100%
>> /dev/mmcsd0s2b 1843200 1843192 8 100%
>> Total 3686400 3686384 16 100%
>> Jul 7 15:21:33 www kernel: swp_pager_getswapspace(3): failed
>> Jul 7 15:48:44 www kernel: swp_pager_getswapspace(1): failed
>> . . .
>> Wed Jul 7 15:57:21 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843192 8 100%
>> /dev/mmcsd0s2b 1843200 1843192 8 100%
>> Total 3686400 3686384 16 100%
>> Jul 7 15:21:33 www kernel: swp_pager_getswapspace(3): failed
>> Jul 7 15:48:44 www kernel: swp_pager_getswapspace(1): failed
>> . . .
>> Wed Jul 7 16:31:52 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 1843192 8 100%
>> /dev/mmcsd0s2b 1843200 1843192 8 100%
>> Total 3686400 3686384 16 100%
>> Jul 7 15:48:44 www kernel: swp_pager_getswapspace(1): failed
>> Jul 7 16:13:16 www kernel: swp_pager_getswapspace(3): failed
>> . . .
>> Wed Jul 7 17:47:11 PDT 2021
>> Device 1K-blocks Used Avail Capacity
>> /dev/da0s2b 1843200 32696 1810504 2%
>> /dev/mmcsd0s2b 1843200 33572 1809628 2%
>> Total 3686400 66268 3620132 2%
>>
>> END QUOTE
>>
>> It looks like for the configuration as it is, the
>> bulk build needs to build such that the load
>> average stays near 1 or less, avoiding near 2 or
>> more: no use of ALLOW_MAKE_JOBS=yes during the bulk
>> build is one way to do that.
>>
>> In http://www.zefox.org/~bob/poudriere.conf (modified
>> for illustration):
>>
>> # By default MAKE_JOBS is disabled to allow only one process per cpu
>> # Use the following to allow it anyway
>> #ALLOW_MAKE_JOBS=yes
>> # List of packages that will always be allowed to use MAKE_JOBS
>> # regardless of ALLOW_MAKE_JOBS. This is useful for allowing ports
>> # which holdup the rest of the queue to build more quickly.
>> #ALLOW_MAKE_JOBS_PACKAGES="pkg ccache py*"
>>
>> I'll also note that:
>>
>> http://www.zefox.org/~bob/poudriere.d/make.conf
>>
>> should not ever have the "ALLOW_MAKE_JOBS=yes" that
>> is does: it is the wrong symbol for that kind of
>> context. poudriere converts ALLOW_MAKE_JOBS to something
>> else used in make.
>>
>> QUOTE (not modified for illustration)
>> ALLOW_MAKE_JOBS=yes
>> MAKE_JOBS_NUMBER=2
>> #.if ${.CURDIR:M*www/chromium}
>> #MAKE_JOBS_NUMBER_LIMIT=2
>> #.endif
>> #.if ${.CURDIR:M*databases/sqlite3}
>> #MAKE_JOBS_NUMBER_LIMIT=2
>> #.endif
>> #.if ${.CURDIR:M*www/firefox}
>> #MAKE_JOBS_NUMBER_LIMIT=2
>> #.endif
>> END QUOTE
>
Looks like you could use:
MAKE_JOBS_NUMBER=2
.if ${.CURDIR:M*www/chromium}
MAKE_JOBS_UNSAFE=
.endif
to have www/chromium build as, essentially, -j1 .
One thing that MAKE_JOBS_UNSAFE= leads to is:
MAKE_JOBS_NUMBER=1
(Or you could put the MAKE_JOBS_UNSAFE= in the
www/chromium makefile .)
>>
>>>
>>> The last time www/chromium was compiled (using make) on this machine
>>> I don't remember seeing such a python jam. If it happened at all the
>>> Pi3 worked through it faster than presently.
>>
>> Which was the old make: -j1 vs. -j2 vs. -j3 vs. -j4 ?
>>
>> The ALLOW_MAKE_JOBS=yes use is like -j4 in your 4 core
>> context. Lack of ALLOW_MAKE_JOBS=yes is like -j1 .
>>
>> The -jN is for the number of make processes allowed to be
>> active per builder, including when there is only one builder.
>>
>> The ALLOW_MAKE_JOBS=yes meant that there was likely a massive
>> amount of paging activity that was taking up much of the
>> time. That would still have been true with a much lager
>> swap space: it is a type of context where Lack of
>> ALLOW_MAKE_JOBS=yes may well take notably less time to
>> finish.
>
===
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)
