Hello,
I tried staticaly linked sane-backends-1.0.15.
OpenBSD 3.7 GENERIC#0 i386
# dmesg | grep uscanner
uscanner0 at uhub0 port 2
uscanner0: UMAX Data Systems Astra 1220U, rev 1.00/1.00, addr 2
# sane-find-scanner
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (UNKNOWN vendor and product) at device /dev/uscanner0
# Your USB scanner was detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# `UNKNOWN vendor and product' means that there seems to be a scanner at this
# device file but the vendor and product ids couldn't be identified.
# Currently identification only works with Linux versions >= 2.4.8. You may
# need to configure your backend manually, see the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# scanimage -L
device `test:0' is a Noname frontend-tester virtual device
device `test:1' is a Noname frontend-tester virtual device
# scanimage -d umax1220u:/dev/uscanner0
scanimage: open of device umax1220u:/dev/uscanner0 failed: Operation not
supported
...
[dll] sane_open: trying to open `umax1220u:/dev/uscanner0'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.1
scanimage: open of device umax1220u:/dev/uscanner0 failed: Operation not
supported
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: finished
Where could be the problem?
-------------------------------------------------------------------------------
http://www.one.lv - Tavs mobilais e-pasts!
Tagad lasi savu e-pastu ar mobilo telefonu - wap.one.lv!
