On Tue, Dec 13, 2005 at 04:39:50PM +0000, pedro la peu wrote:
> > Well I would call it more "constant". The audio is OK and seems
> > somewhat in sync with the video but (on DVDs and other large videos)
> > the image tears and flickers like crazy.
I have noticed that both vlc and mplayer are really choppy on my macppc system.
vlc is ok with videos in a window which I can resize to essentially full screen
without problems but both vlc and mplayer are unuseable at full screen. CPU
does not appear to ever go above roughly 30% utilization when at full screen
with either program. Audio is ok and not choppy with either program. Though
I also noticed that unless I use null output for audio with some videos then
they will play at what appears to be 2-3 times the regular speed. Most likely
some weird bug with mplayer as I have never seen such a problem with vlc.
> That said, I have added support to radeon(4) for my ATI RS480 PCI-E (aka
> IXP200) so I'm not officially running -current. Before that I had to use
> xorg's VESA driver and mplayer was utterly horrible.
>
> Also mplayer is only built with --enable-runtime-cpudetection on i386.
> As you are running the i386 binary on an amd64 cpu this might be relevant.
> If I build mplayer with that option it seems fine - but it complains:
Maybe you could clarify this statement... he's running amd64 and thus an
amd64 binary. There is no support for running i386 binaries on amd64, and
very little gain from even thinking of adding such support.
--
[ using 334036 bytes of bsd ELF symbol table ]
console out [ATY,RageM3p29s]console in [keyboard] ADB found
: memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, size
20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.8-current (GENERIC) #0: Sun Dec 11 12:47:29 EST 2005
[EMAIL PROTECTED]:/usr/src/src/sys/arch/macppc/compile/GENERIC
real mem = 402653184 (393216K)
avail mem = 358178816 (349784K)
using 1254 buffers containing 20131840 bytes (19660K) of memory
mainbus0 (root): model PowerBook4,1
cpu0 at mainbus0: 750 (Revision 0x3311): 600 MHz: 256KB backside cache
memc0 at mainbus0: uni-n
ki2c0 at memc0 offset 0xf8001000
maciic0 at ki2c0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
find_node_intr unable to find step size
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
programmer-switch at macgpio0 not configured
firewire-linkon at macgpio0 not configured
gpio1 at macgpio0 not configured
gpio9 at macgpio0 not configured
extint-gpio4 at macgpio0 not configured
extint-gpio12 at macgpio0 not configured
escc-legacy at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
tumbler0 at macobio0 offset 0x10000: irq 30,1,2
i2s_set_rate: timeout
timer at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0: console keyboard, using wsdisplay0
pi2c0 at adb0 addr 3:
maciic1 at pi2c0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 99% charged
battery at macobio0 offset 0x0 not configured
backlight at macobio0 offset 0xf300 not configured
ki2c1 at macobio0 offset 0x18000
maciic2 at ki2c1
deq at maciic2 addr 0x34 not configured
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK4019GAX>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2102, 1K27> SCSI0 5/cdrom
removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.12 variant 1, address 00:30:65:03:99:9c
audio0 at tumbler0
ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00
"Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address
00:03:93:6a:d2:48
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
bootpath: '/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02
