On Thu, Jan 18, 2007 at 11:02:12AM -0600, Beavis wrote:
> A suggestion would be to enable softdep on your /etc/fstab
>
softdep is nice but running without it does not make a core 2 duo as slow
as a PIII.
A good sugestion would be to look in top and vmstat -i for huge time
used for interrupt or system. My guess is that the box needs a ACPI
enabled kernel (config -ef bsd and type "enable acpi") to get the correct
interrupt routing.
--
:wq Claudio
>
> On 1/18/07, Vijay Sankar <[EMAIL PROTECTED]> wrote:
> >
> >Good day,
> >
> >I purchased a new server two days ago so that I can help test applications
> >like OpenOffice, Asterisk, and gCompris. It has Core 2 Duo 6400, 4GB of
> >RAM,
> >reasonable disk space etc.
> >
> >Compiling the kernel took about 25 minutes.
> >After rebooting, building userland took 9 hours and 15 minutes
> >After rebooting, Building X took 4 hours and 6 minutes
> >
> >I followed the excellent documentation very closely, so there were no
> >errors.
> >However, what if anything, can be done to make the builds go faster? I did
> >purchase the wrong video card (e-GeForce 7300 GT) -- did not realize it is
> >not supported by X 6.9.0, would that have any impact on build times?
> >
> >I would really appreciate it if anyone can give me some suggestions on
> >making
> >the builds go faster.
> >
> >TIA,
> >
> >Vijay
> >
> >Here is the dmesg
> >
> >OpenBSD 4.0-current (GENERIC) #0: Wed Jan 17 15:56:05 CST 2007
> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> >cpu0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class)
> >2.14
> >GHz
> >cpu0:
> >
> >FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
> >real mem = 3488116736 (3406364K)
> >avail mem = 3192930304 (3118096K)
> >using 4256 buffers containing 174530560 bytes (170440K) of memory
> >mainbus0 (root)
> >bios0 at mainbus0: AT/286+(57) BIOS, date 09/20/06, BIOS32 rev. 0 @
> >0xfbec0,
> >SMBIOS rev. 2.3 @ 0xf0000 (71 entries)
> >bios0: ASUSTeK Computer INC. P5N32-SLI PREMIUM
> >apm0 at bios0: Power Management spec V1.2
> >apm0: AC on, battery charge unknown
> >apm0: flags 70102 dobusy 1 doidle 1
> >pcibios0 at bios0: rev 3.0 @ 0xf0000/0xde74
> >pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/320 (18 entries)
> >pcibios0: bad IRQ table checksum
> >pcibios0: PCI BIOS has 18 Interrupt Routing table entries
> >pcibios0: PCI Exclusive IRQs: 5 7 10 11
> >pcibios0: no compatible PCI ICU found
> >pcibios0: Warning, unable to fix up PCI interrupt routing
> >pcibios0: PCI bus #6 is the last bus
> >bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4000!
> >acpi at mainbus0 not configured
> >cpu0 at mainbus0
> >pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> >pchb0 at pci0 dev 0 function 0 vendor "NVIDIA", unknown product 0x0071 rev
> >0xc1
> >vendor "NVIDIA", unknown product 0x007f (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 0 function 1 not configured
> >vendor "NVIDIA", unknown product 0x0075 (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 0 function 2 not configured
> >vendor "NVIDIA", unknown product 0x006f (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 0 function 3 not configured
> >vendor "NVIDIA", unknown product 0x00b4 (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 0 function 4 not configured
> >vendor "NVIDIA", unknown product 0x0076 (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 1 function 0 not configured
> >vendor "NVIDIA", unknown product 0x0078 (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 1 function 1 not configured
> >vendor "NVIDIA", unknown product 0x0079 (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 1 function 2 not configured
> >vendor "NVIDIA", unknown product 0x007a (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 1 function 3 not configured
> >vendor "NVIDIA", unknown product 0x007b (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 1 function 4 not configured
> >vendor "NVIDIA", unknown product 0x007c (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 1 function 5 not configured
> >vendor "NVIDIA", unknown product 0x007d (class memory subclass RAM, rev
> >0xa1)
> >at pci0 dev 1 function 6 not configured
> >ppb0 at pci0 dev 2 function 0 "NVIDIA MCP04 PCIE" rev 0xa2
> >pci1 at ppb0 bus 1
> >vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 GT" rev 0xa1
> >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >ppb1 at pci0 dev 5 function 0 "NVIDIA MCP04 PCIE" rev 0xa2
> >pci2 at ppb1 bus 2
> >"CMD Technology SiI3132 SATA" rev 0x01 at pci2 dev 0 function 0 not
> >configured
> >"NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 9 function 0 not configured
> >pcib0 at pci0 dev 10 function 0 "NVIDIA MCP55 ISA" rev 0xa2
> >nviic0 at pci0 dev 10 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
> >iic0 at nviic0
> >iic1 at nviic0
> >adt0 at iic1 addr 0x2e: adt7475 rev 0x69
> >"NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 10 function 2 not configured
> >ohci0 at pci0 dev 11 function 0 "NVIDIA MCP55 USB" rev 0xa1: irq 7,
> >version
> >1.0, legacy support
> >usb0 at ohci0: USB revision 1.0
> >uhub0 at usb0
> >uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
> >uhub0: 10 ports with 10 removable, self powered
> >ehci0 at pci0 dev 11 function 1 "NVIDIA MCP55 USB" rev 0xa2: irq 5
> >usb1 at ehci0: USB revision 2.0
> >uhub1 at usb1
> >uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
> >uhub1: 10 ports with 10 removable, self powered
> >pciide0 at pci0 dev 13 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA,
> >channel 0
> >configured to compatibility, channel 1 configured to compatibility
> >atapiscsi0 at pciide0 channel 0 drive 0
> >scsibus0 at atapiscsi0: 2 targets
> >cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H22N, 1.01> SCSI0
> >5/cdrom
> >removable
> >cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> >pciide0: channel 1 ignored (disabled)
> >pciide1 at pci0 dev 14 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> >pciide1: using irq 10 for native-PCI interrupt
> >wd0 at pciide1 channel 0 drive 0: <WDC WD3200KS-75PFB0>
> >wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> >wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> >wd1 at pciide1 channel 1 drive 0: <WDC WD3200KS-75PFB0>
> >wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> >wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> >pciide2 at pci0 dev 14 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> >pciide2: using irq 11 for native-PCI interrupt
> >pciide3 at pci0 dev 14 function 2 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> >pciide3: using irq 5 for native-PCI interrupt
> >ppb2 at pci0 dev 15 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
> >pci3 at ppb2 bus 3
> >"TigerJet Network PCI interface" rev 0x00 at pci3 dev 6 function 0 not
> >configured
> >"VIA VT6306 FireWire" rev 0xc0 at pci3 dev 11 function 0 not configured
> >azalia0 at pci0 dev 15 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2: irq 5
> >azalia0: host: High Definition Audio rev. 1.0
> >azalia0: codec: 0x04x/0x11d4 (rev. 2.0), HDA version 1.0
> >audio0 at azalia0
> >nfe0 at pci0 dev 17 function 0 "NVIDIA MCP55 LAN" rev 0xa2: irq 11,
> >address
> >00:18:f3:70:21:52
> >eephy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
> >nfe1 at pci0 dev 18 function 0 "NVIDIA MCP55 LAN" rev 0xa2: irq 7, address
> >00:18:f3:70:27:90
> >eephy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
> >ppb3 at pci0 dev 19 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> >pci4 at ppb3 bus 4
> >ppb4 at pci0 dev 23 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> >pci5 at ppb4 bus 5
> >ppb5 at pci0 dev 24 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> >pci6 at ppb5 bus 6
> >isa0 at pcib0
> >isadma0 at isa0
> >pckbc0 at isa0 port 0x60/5
> >pckbd0 at pckbc0 (kbd slot)
> >pckbc0: using irq 1 for kbd slot
> >wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >pmsi0 at pckbc0 (aux slot)
> >pckbc0: using irq 12 for aux slot
> >wsmouse0 at pmsi0 mux 0
> >pcppi0 at isa0 port 0x61
> >midi0 at pcppi0: <PC speaker>
> >spkr0 at pcppi0
> >it0 at isa0 port 0x290/8: IT87
> >npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> >pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >biomask efed netmask efed ttymask ffef
> >pctr: 686-class user-level performance counters enabled
> >mtrr: Pentium Pro MTRR support
> >umass0 at uhub1 port 5 configuration 1 interface 0
> >umass0: Genesys USB Reader, rev 2.00/93.17, addr 2
> >umass0: using SCSI over Bulk-Only
> >scsibus1 at umass0: 2 targets
> >sd0 at scsibus1 targ 1 lun 0: <Generic, STORAGE DEVICE, 9317> SCSI0
> >0/direct
> >removable
> >sd0: drive offline
> >sd1 at scsibus1 targ 1 lun 1: <Generic, STORAGE DEVICE, 9317> SCSI0
> >0/direct
> >removable
> >sd1: drive offline
> >ugen0 at uhub1 port 9
> >ugen0: Realtek RTL8187, rev 2.00/1.00, addr 3
> >dkcsum: wd0 matches BIOS drive 0x80
> >wd1: no disk label
> >dkcsum: wd1 matches BIOS drive 0x81
> >root on wd0a
> >rootdev=0x0 rrootdev=0x300 rawdev=0x302
> >
> >--
> >Vijay Sankar
> >ForeTell Technologies Limited
> >59 Flamingo Avenue, Winnipeg, MB, Canada R3J 0X6
> >Phone: +1 (204) 885-9535, E-Mail: [EMAIL PROTECTED]
> >
> >
