On Thu, Dec 03, 2020 at 04:48:04PM +0000, James Cook wrote:
> I just installed abiword and also just upgraded to the latest snapshot
> (and ran pkg_add -u). abiword immediately crashes when I run it. I have
> never tried running abiword on OpenBSD before. Is it broken for others
> or just for me?
Sorry, should probably include uname:
falsifian angel ~ $ uname -a
OpenBSD angel.falsifian.org 6.8 GENERIC.MP#206 amd64
and here's dmesg output in case it's helpful.
OpenBSD 6.8-current (GENERIC.MP) #206: Wed Dec 2 17:47:17 MST 2020
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17161912320 (16366MB)
avail mem = 16626487296 (15856MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (59 entries)
bios0: vendor Award Software International, Inc. version "F7" date 11/20/2009
bios0: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT HPET MCFG TAMG APIC
acpi0: wakeup devices PCI0(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4)
PCE6(S4) PCE7(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) II X3 710 Processor, 2612.29 MHz, 10-04-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X3 710 Processor, 2611.92 MHz, 10-04-02
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II X3 710 Processor, 2611.93 MHz, 10-04-02
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2: AMD erratum 721 detected and fixed
cpu2: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P2P_)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus 2 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE8)
acpiprt9 at acpi0: bus -1 (PCE9)
acpiprt10 at acpi0: bus 3 (PCEA)
acpiprt11 at acpi0: bus -1 (PCEB)
acpiprt12 at acpi0: bus -1 (PCEC)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpicpu2 at acpi0: C1(@1 halt!), PSS
cpu0: 2612 MHz: speeds: 2600 1900 1400 800 MHz
pci0 at mainbus0 bus 0
0:0:0: mem address conflict 0xe0000000/0x20000000
pchb0 at pci0 dev 0 function 0 "ATI RD780 HT-PCIE" rev 0x00
ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 5450" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 4 function 0 "ATI RD790 PCIE" rev 0x00
pci2 at ppb1 bus 2
jmb0 at pci2 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus1 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 16 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb2 at pci0 dev 10 function 0 "ATI RD790 PCIE" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
msi, address 00:24:1d:12:df:b1
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
ahci1 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22, AHCI
1.1
scsibus2 at ahci1: 32 targets
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 1 drive 0: <WDC WDS100T2B0A-00SM50>
wd0: 1-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide1:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16
azalia1: codecs: Realtek ALC885
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 4
"TI TSB43AB23 FireWire" rev 0x00 at pci4 dev 14 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8720F rev 5, EC port 0x228
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
vmm0 at mainbus0: SVM/RVI
uhub7 at uhub0 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/77.63 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "Kensington Kensington
Expert Mouse" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 4 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub7 port 4 configuration 1 interface 0 "ZSA Ergodox EZ" rev
1.10/0.01 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
uhidev2 at uhub7 port 4 configuration 1 interface 1 "ZSA Ergodox EZ" rev
1.10/0.01 addr 4
uhidev2: iclass 3/0, 5 report ids
uhid0 at uhidev2 reportid 3: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 4: input=2, output=0, feature=0
ukbd1 at uhidev2 reportid 5: 128 variable keys, 0 key codes
wskbd1 at ukbd1 mux 1
umass0 at uhub1 port 5 configuration 1 interface 0 " USB DISK 2.0" rev
2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <, USB DISK 2.0, PMAP> removable
serial.13fe4100332B9C23F773
sd0: 60960MB, 512 bytes/sector, 124846080 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd1 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 391167MB, 512 bytes/sector, 801111803 sectors
root on sd1a (676fc55ae679a444.a) swap on sd1b dump on sd1b
radeondrm0: CEDAR
radeondrm0: 2560x1440, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhub2 detached
uhub3 detached
wsmouse0 detached
ums0 detached
uhidev0 detached
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev1 detached
uhid0 detached
uhid1 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd1 detached
uhidev2 detached
uhub7 detached
uhub0 detached
uhub4 detached
uhub5 detached
sd0 detached
scsibus3 detached
umass0 detached
uhub1 detached
uhub6 detached
pciide0: restore for unknown chip map 2363
uhub0 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
uhub1 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
uhub2 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
uhub3 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
uhub4 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
uhub5 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
uhub7 at uhub2 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/77.63 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "Kensington Kensington
Expert Mouse" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 4 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub7 port 4 configuration 1 interface 0 "ZSA Ergodox EZ" rev
1.10/0.01 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub7 port 4 configuration 1 interface 1 "ZSA Ergodox EZ" rev
1.10/0.01 addr 4
uhidev2: iclass 3/0, 5 report ids
uhid0 at uhidev2 reportid 3: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 4: input=2, output=0, feature=0
ukbd1 at uhidev2 reportid 5: 128 variable keys, 0 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
--
James
