Re: Nextcloud upgrade path

Tue, 13 Jun 2023 06:12:02 -0700 


On 6/8/23 23:35, Stuart Henderson wrote:

I've been pkg_delete'ing the old one and pkg_add'ing the new when I want 
to swap between branches.


I do the same and it's pretty clean and straightforward.




Using @pkgpath won't help for a correct upgrade path across multiple 
versions, the best it will do is offer multiple choices, but IIRC for 
nextcloud it has to be done major version by major version, you can't 
jump over them. i.e. when an old version is removed, add @pkgpath to 
them new version so that users of the old one get updated.


I agree a current.html entry might be a good idea.


About delete/add a new branch version? OK by me too :D



--
   Sent from a phone, apologies for poor formatting.


On 8 June 2023 15:32:16 Giovanni Bechis <giova...@paclan.it> wrote:


Hi,
I have a Nextcloud 23.x instance running on OpenBSD 7.3.

pkg_add(1) suggests to upgrade to 24.x and then to 25.x before next 
release.


$ doas pkg_add -ui
[...]
--- +nextcloud-23.0.12p1 -------------------
Nextcloud 23 is EOL upstream, it is advised to update your installation
to 24 then to 25 to make sure you're on a supported branch by the time
OpenBSD 7.4 is released.
$ doas pkg_add -i nextcloud
quirks-6.121 signed on 2023-06-08T09:49:46Z
Ambiguous: choose package for nextcloud
a       0: <None>
         1: nextcloud-23.0.12p1
         2: nextcloud-24.0.12
         3: nextcloud-25.0.6
Your choice: 2
Can't install nextcloud-24.0.12 because of conflicts (nextcloud-23.0.12p1)
--- nextcloud-24.0.12 -------------------
Can't install nextcloud-24.0.12: conflicts
Couldn't install nextcloud-24.0.12

How should a user upgrade (some info on current.html are needed imho) ?

Can't we add pkgpath entries in order to correctly upgrade between 
nextcloud versions ?


  Cheers
   Giovanni

-------------------------------------------------------------------------------------------------

OpenBSD 7.3 (GENERIC) #655: Fri Mar 17 19:16:28 MDT 2023
     dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
real mem  = 536363008 (511MB)
avail mem = 509448192 (485MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 20/80/26, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0: (uniprocessor)

cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 
586-class) 500 MHz, 05-0a-02

cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
mtrr: K6-family MTRR support (2 registers)
amdmsr0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
0:20:0: io address conflict 0x6100/0x100
0:20:0: io address conflict 0x6200/0x200
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES

vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, 
address 00:00:24:c8:de:80
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, 
address 00:00:24:c8:de:81
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, 
address 00:00:24:c8:de:82
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, 
address 00:00:24:c8:de:83
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 
0x004063, model 0x0034
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 
32-bit 3579545Hz timer, watchdog, gpio, i2c

gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0

pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, 
channel 0 wired to compatibility, channel 1 wired to compatibility

wd0 at pciide0 channel 0 drive 0: <ST500LM030-2E717D>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)

ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, 
version 1.0, legacy support

ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0

uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev 
2.00/1.00 addr 1

isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbc0: unable to establish interrupt for irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0

uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev 
1.00/1.00 addr 1

vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (5527fdd6d670763b.a) swap on wd0b dump on wd0b


























					Reply via email to