But this would prevent printing with regular lpr, no? (honestly I don’t even
know if it’s possible ).
—
Antoine
> On 28 Sep 2023, at 08:34, David Coppa <dco...@gmail.com> wrote:
>
>
> Hi all,
>
> When trying to print a test page in the final stage of hp-setup,
> the following error occurs:
>
> Printing test page to printer ENVY_4520...
> lpr: ENVY_4520: unknown printer
> error: Print command failed with exit code 256!
>
> This is because /usr/bin/lpr comes before /usr/local/bin/lpr in the
> PATH environment variable.
>
> Here's my fix. I don't use the HPLIP GUI, but I applied the same
> fix to all occurrences.
>
> Ciao,
> David
>
> Index: print/hplip/Makefile
> ===================================================================
> RCS file: /cvs/ports/print/hplip/Makefile,v
> retrieving revision 1.211
> diff -u -p -u -p -r1.211 Makefile
> --- print/hplip/Makefile 7 Jun 2023 15:45:56 -0000 1.211
> +++ print/hplip/Makefile 28 Sep 2023 05:40:49 -0000
> @@ -18,6 +18,9 @@ PKGNAME-hpcups= hpcups-${V}
> PKGNAME-hpijs= hpijs-${V}
> PKGNAME-gui= hplip-gui-${V}
>
> +REVISION-main = 0
> +REVISION-gui = 0
> +
> SHARED_LIBS += hpdiscovery 0.0 # 0.1
> SHARED_LIBS += hpmud 2.0 # 0.6
> SHARED_LIBS += hpipp 0.0 # 0.1
> @@ -184,6 +187,7 @@ pre-configure:
> ${WRKSRC}/ui4/devmgr5.py \
> ${WRKSRC}/fax/backend/hpfax.py \
> ${WRKSRC}/base/codes.py \
> + ${WRKSRC}/base/device.py \
> ${WRKSRC}/base/g.py \
> ${WRKSRC}/base/queues.py \
> ${WRKSRC}/base/services.py \
> @@ -202,8 +206,11 @@ pre-configure:
> ${WRKSRC}/scan.py \
> ${WRKSRC}/setup.py \
> ${WRKSRC}/ui4/nodevicesdialog.py \
> + ${WRKSRC}/ui4/printsettingstoolbox.py \
> + ${WRKSRC}/ui5/printsettingstoolbox.py \
> ${WRKSRC}/ui/devmgr4.py \
> ${WRKSRC}/ui/nodevicesform.py \
> + ${WRKSRC}/ui/scrollprint.py \
> ${WRKSRC}/logcapture.py \
> ${WRKSRC}/createPPD.sh
>
> Index: print/hplip/patches/patch-base_device_py
> ===================================================================
> RCS file: print/hplip/patches/patch-base_device_py
> diff -N print/hplip/patches/patch-base_device_py
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ print/hplip/patches/patch-base_device_py 28 Sep 2023 05:40:49 -0000
> @@ -0,0 +1,15 @@
> +Index: base/device.py
> +--- base/device.py.orig
> ++++ base/device.py
> +@@ -2450,9 +2450,9 @@ Content-length: %d\r
> + if remove: rem_str = '-r'
> +
> + if is_gzip:
> +- c = 'gunzip -c %s | lpr %s %s -P%s' % (file_name,
> raw_str, rem_str, printer_name)
> ++ c = 'gunzip -c %s | ${TRUEPREFIX}/bin/lpr %s %s -P%s' %
> (file_name, raw_str, rem_str, printer_name)
> + else:
> +- c = 'lpr -P%s %s %s %s' % (printer_name, raw_str,
> rem_str, file_name)
> ++ c = '${TRUEPREFIX}/bin/lpr -P%s %s %s %s' %
> (printer_name, raw_str, rem_str, file_name)
> +
> + exit_code = os_utils.execute(c)
> +
> Index: print/hplip/patches/patch-ui4_printsettingstoolbox_py
> ===================================================================
> RCS file: print/hplip/patches/patch-ui4_printsettingstoolbox_py
> diff -N print/hplip/patches/patch-ui4_printsettingstoolbox_py
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ print/hplip/patches/patch-ui4_printsettingstoolbox_py 28 Sep 2023
> 05:40:49 -0000
> @@ -0,0 +1,15 @@
> +Index: ui4/printsettingstoolbox.py
> +--- ui4/printsettingstoolbox.py.orig
> ++++ ui4/printsettingstoolbox.py
> +@@ -264,9 +264,9 @@ class PrintSettingsToolbox(QToolBox):
> +
> + if utils.which('lpr'):
> + if alt_nup:
> +- cmd = ' '.join(['psnup', '-%d' % nup, ''.join(['"', p,
> '"']), '| lpr -P', self.cur_printer])
> ++ cmd = ' '.join(['psnup', '-%d' % nup, ''.join(['"', p,
> '"']), '| ${TRUEPREFIX}/bin/lpr -P', self.cur_printer])
> + else:
> +- cmd = ' '.join(['lpr -P', self.cur_printer])
> ++ cmd = ' '.join(['${TRUEPREFIX}/bin/lpr -P',
> self.cur_printer])
> +
> + if copies > 1:
> + cmd = ' '.join([cmd, '-#%d' % copies])
> Index: print/hplip/patches/patch-ui5_printsettingstoolbox_py
> ===================================================================
> RCS file: print/hplip/patches/patch-ui5_printsettingstoolbox_py
> diff -N print/hplip/patches/patch-ui5_printsettingstoolbox_py
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ print/hplip/patches/patch-ui5_printsettingstoolbox_py 28 Sep 2023
> 05:40:49 -0000
> @@ -0,0 +1,15 @@
> +Index: ui5/printsettingstoolbox.py
> +--- ui5/printsettingstoolbox.py.orig
> ++++ ui5/printsettingstoolbox.py
> +@@ -247,9 +247,9 @@ class PrintSettingsToolbox(QToolBox):
> +
> + if utils.which('lpr'):
> + if alt_nup:
> +- cmd = ' '.join(['psnup', '-%d' % nup, ''.join(['"', p,
> '"']), '| lpr -P', self.cur_printer])
> ++ cmd = ' '.join(['psnup', '-%d' % nup, ''.join(['"', p,
> '"']), '| ${TRUEPREFIX}/bin/lpr -P', self.cur_printer])
> + else:
> +- cmd = ' '.join(['lpr -P', self.cur_printer])
> ++ cmd = ' '.join(['${TRUEPREFIX}/bin/lpr -P',
> self.cur_printer])
> +
> + if copies > 1:
> + cmd = ' '.join([cmd, '-#%d' % copies])
> Index: print/hplip/patches/patch-ui_scrollprint_py
> ===================================================================
> RCS file: print/hplip/patches/patch-ui_scrollprint_py
> diff -N print/hplip/patches/patch-ui_scrollprint_py
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ print/hplip/patches/patch-ui_scrollprint_py 28 Sep 2023 05:40:49 -0000
> @@ -0,0 +1,15 @@
> +Index: ui/scrollprint.py
> +--- ui/scrollprint.py.orig
> ++++ ui/scrollprint.py
> +@@ -988,9 +988,9 @@ class ScrollPrintView(ScrollView):
> +
> + if utils.which('lpr'):
> + if alt_nup:
> +- cmd = ' '.join(['psnup', '-%d' % nup,
> ''.join(['"', p, '"']), '| lpr -P', self.cur_printer])
> ++ cmd = ' '.join(['psnup', '-%d' % nup,
> ''.join(['"', p, '"']), '| ${TRUEPREFIX}/bin/lpr -P', self.cur_printer])
> + else:
> +- cmd = ' '.join(['lpr -P', self.cur_printer])
> ++ cmd = ' '.join(['${TRUEPREFIX}/bin/lpr -P',
> self.cur_printer])
> +
> + if copies > 1:
> + cmd = ' '.join([cmd, '-#%d' % copies])
>
