I've had this NanoPi R6S for over a year. It has three network ports:
two rge(4) interfaces and one dwqe(4). Although the dwqe(4) doesn't
work yet; I'm working on a diff for that. And you can get it in a
really nice and solid case.
Recently a device tree for this board made it into Linux. But U-Boot
support is still missing. Fortunately, once we have a device tree,
creating a new U-Boot config isn't too difficult. Had to make some
small modifications to the device tree to match the other device trees
for RK3588 boards.
I had to erase the eMMC to make it work.
ok?
Index: sysutils/u-boot/rk3588/Makefile
===================================================================
RCS file: /cvs/ports/sysutils/u-boot/rk3588/Makefile,v
retrieving revision 1.1
diff -u -p -r1.1 Makefile
--- sysutils/u-boot/rk3588/Makefile 26 Nov 2023 21:06:26 -0000 1.1
+++ sysutils/u-boot/rk3588/Makefile 20 Feb 2024 21:31:33 -0000
@@ -1,8 +1,10 @@
VERSION= 2024.01-rc3
+REVISION= 0
SOC= rk3588
BOARDS=\
+ nanopi-r6s-rk3588s \
nanopc-t6-rk3588 \
orangepi-5-plus-rk3588 \
orangepi-5-rk3588s \
Index:
sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s-u-boot_dtsi
===================================================================
RCS file:
sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s-u-boot_dtsi
diff -N
sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s-u-boot_dtsi
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++
sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s-u-boot_dtsi
20 Feb 2024 21:31:33 -0000
@@ -0,0 +1,21 @@
+Index: arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi
+--- arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi.orig
++++ arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi
+@@ -0,0 +1,17 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2023 Collabora Ltd.
++ */
++
++#include "rk3588s-u-boot.dtsi"
++
++/ {
++ chosen {
++ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
++ };
++};
++
++&sdhci {
++ cap-mmc-highspeed;
++ mmc-ddr-1_8v;
++};
Index: sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s_dts
===================================================================
RCS file:
sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s_dts
diff -N sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s_dts
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ sysutils/u-boot/rk3588/patches/patch-arch_arm_dts_rk3588s-nanopi-r6s_dts
20 Feb 2024 21:31:33 -0000
@@ -0,0 +1,769 @@
+Index: arch/arm/dts/rk3588s-nanopi-r6s.dts
+--- arch/arm/dts/rk3588s-nanopi-r6s.dts.orig
++++ arch/arm/dts/rk3588s-nanopi-r6s.dts
+@@ -0,0 +1,765 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include "rk3588s.dtsi"
++
++/ {
++ model = "FriendlyElec NanoPi R6S";
++ compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
++
++ aliases {
++ ethernet0 = &gmac1;
++ mmc0 = &sdmmc;
++ mmc1 = &sdhci;
++ serial2 = &uart2;
++ };
++
++ chosen {
++ stdout-path = "serial2:115200n8";
++ };
++
++ adc-keys {
++ compatible = "adc-keys";
++ io-channels = <&saradc 0>;
++ io-channel-names = "buttons";
++ keyup-threshold-microvolt = <1800000>;
++ poll-interval = <100>;
++
++ button-maskrom {
++ label = "Maskrom";
++ linux,code = <KEY_VENDOR>;
++ press-threshold-microvolt = <1800>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&key1_pin>;
++
++ button-user {
++ label = "User";
++ linux,code = <BTN_1>;
++ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
++ debounce-interval = <50>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ sys_led: led-0 {
++ label = "sys_led";
++ gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&sys_led_pin>;
++ };
++
++ wan_led: led-1 {
++ label = "wan_led";
++ gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&wan_led_pin>;
++ };
++
++ lan1_led: led-2 {
++ label = "lan1_led";
++ gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan1_led_pin>;
++ };
++
++ lan2_led: led-3 {
++ label = "lan2_led";
++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan2_led_pin>;
++ };
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_1v1_nldo_s3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc_3v3_s0: vcc-3v3-s0-regulator {
++ compatible = "regulator-fixed";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc_3v3_s0";
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sd_s0_pwr>;
++ regulator-name = "vcc_3v3_sd_s0";
++ regulator-boot-on;
++ regulator-max-microvolt = <3000000>;
++ regulator-min-microvolt = <3000000>;
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_3v3_pcie20";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc5v0_usb: vcc5v0-usb-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_usb";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&typec5v_pwren>;
++ regulator-name = "vcc5v0_usb_otg0";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++
++ vcc5v0_host_20: vcc5v0-host-20-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_host20_en>;
++ regulator-name = "vcc5v0_host_20";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++};
++
++&combphy0_ps {
++ status = "okay";
++};
++
++&combphy2_psu {
++ status = "okay";
++};
++
++&cpu_b0 {
++ cpu-supply = <&vdd_cpu_big0_s0>;
++};
++
++&cpu_b1 {
++ cpu-supply = <&vdd_cpu_big0_s0>;
++};
++
++&cpu_b2 {
++ cpu-supply = <&vdd_cpu_big1_s0>;
++};
++
++&cpu_b3 {
++ cpu-supply = <&vdd_cpu_big1_s0>;
++};
++
++&cpu_l0 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l1 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l2 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l3 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&gmac1 {
++ clock_in_out = "output";
++ phy-handle = <&rgmii_phy1>;
++ phy-mode = "rgmii-rxid";
++ pinctrl-0 = <&gmac1_miim
++ &gmac1_tx_bus2
++ &gmac1_rx_bus2
++ &gmac1_rgmii_clk
++ &gmac1_rgmii_bus>;
++ pinctrl-names = "default";
++ tx_delay = <0x42>;
++ status = "okay";
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0m2_xfer>;
++ status = "okay";
++
++ vdd_cpu_big0_s0: regulator@42 {
++ compatible = "rockchip,rk8602";
++ reg = <0x42>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu_big0_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <1050000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_cpu_big1_s0: regulator@43 {
++ compatible = "rockchip,rk8603", "rockchip,rk8602";
++ reg = <0x43>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu_big1_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <1050000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c2 {
++ status = "okay";
++
++ vdd_npu_s0: regulator@42 {
++ compatible = "rockchip,rk8602";
++ reg = <0x42>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_npu_s0";
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <2300>;
++ regulator-boot-on;
++ regulator-always-on;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c6 {
++ clock-frequency = <200000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c6m0_xfer>;
++ status = "okay";
++
++ hym8563: rtc@51 {
++ compatible = "haoyu,hym8563";
++ reg = <0x51>;
++ #clock-cells = <0>;
++ clock-output-names = "hym8563";
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtc_int>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
++ wakeup-source;
++ };
++};
++
++&mdio1 {
++ rgmii_phy1: ethernet-phy@1 {
++ compatible = "ethernet-phy-id001c.c916";
++ reg = <0x1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtl8211f_rst>;
++ reset-assert-us = <20000>;
++ reset-deassert-us = <100000>;
++ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&pcie2x1l1 {
++ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc_3v3_pcie20>;
++ status = "okay";
++};
++
++&pcie2x1l2 {
++ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc_3v3_pcie20>;
++ status = "okay";
++};
++
++&pinctrl {
++ gpio-key {
++ key1_pin: key1-pin {
++ rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ gpio-leds {
++ sys_led_pin: sys-led-pin {
++ rockchip,pins =
++ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wan_led_pin: wan-led-pin {
++ rockchip,pins =
++ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lan1_led_pin: lan1-led-pin {
++ rockchip,pins =
++ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lan2_led_pin: lan2-led-pin {
++ rockchip,pins =
++ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ hym8563 {
++ rtc_int: rtc-int {
++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ sdmmc {
++ sd_s0_pwr: sd-s0-pwr {
++ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb {
++ typec5v_pwren: typec5v-pwren {
++ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_host20_en: vcc5v0-host20-en {
++ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ rtl8211f {
++ rtl8211f_rst: rtl8211f-rst {
++ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&saradc {
++ vref-supply = <&avcc_1v8_s0>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ no-sdio;
++ no-sd;
++ non-removable;
++ mmc-hs200-1_8v;
++ status = "okay";
++};
++
++&sdmmc {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ disable-wp;
++ max-frequency = <150000000>;
++ no-mmc;
++ no-sdio;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc_3v3_sd_s0>;
++ vqmmc-supply = <&vccio_sd_s0>;
++ status = "okay";
++};
++
++&spi2 {
++ status = "okay";
++ assigned-clocks = <&cru CLK_SPI2>;
++ assigned-clock-rates = <200000000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
++ num-cs = <1>;
++
++ pmic@0 {
++ compatible = "rockchip,rk806";
++ spi-max-frequency = <1000000>;
++ reg = <0x0>;
++
++ interrupt-parent = <&gpio0>;
++ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
++ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
++
++ system-power-controller;
++
++ vcc1-supply = <&vcc5v0_sys>;
++ vcc2-supply = <&vcc5v0_sys>;
++ vcc3-supply = <&vcc5v0_sys>;
++ vcc4-supply = <&vcc5v0_sys>;
++ vcc5-supply = <&vcc5v0_sys>;
++ vcc6-supply = <&vcc5v0_sys>;
++ vcc7-supply = <&vcc5v0_sys>;
++ vcc8-supply = <&vcc5v0_sys>;
++ vcc9-supply = <&vcc5v0_sys>;
++ vcc10-supply = <&vcc5v0_sys>;
++ vcc11-supply = <&vcc_2v0_pldo_s3>;
++ vcc12-supply = <&vcc5v0_sys>;
++ vcc13-supply = <&vcc_1v1_nldo_s3>;
++ vcc14-supply = <&vcc_1v1_nldo_s3>;
++ vcca-supply = <&vcc5v0_sys>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ rk806_dvs1_null: dvs1-null-pins {
++ pins = "gpio_pwrctrl1";
++ function = "pin_fun0";
++ };
++
++ rk806_dvs2_null: dvs2-null-pins {
++ pins = "gpio_pwrctrl2";
++ function = "pin_fun0";
++ };
++
++ rk806_dvs3_null: dvs3-null-pins {
++ pins = "gpio_pwrctrl3";
++ function = "pin_fun0";
++ };
++
++ regulators {
++ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_gpu_s0";
++ regulator-enable-ramp-delay = <400>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_cpu_lit_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_log_s0: dcdc-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <675000>;
++ regulator-max-microvolt = <750000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_log_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <750000>;
++ };
++ };
++
++ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_vdenc_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_ddr_s0: dcdc-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <675000>;
++ regulator-max-microvolt = <900000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_ddr_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <850000>;
++ };
++ };
++
++ vdd2_ddr_s3: dcdc-reg6 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-name = "vdd2_ddr_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc_2v0_pldo_s3: dcdc-reg7 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <2000000>;
++ regulator-max-microvolt = <2000000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_2v0_pldo_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <2000000>;
++ };
++ };
++
++ vcc_3v3_s3: dcdc-reg8 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc_3v3_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vddq_ddr_s0: dcdc-reg9 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-name = "vddq_ddr_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8_s3: dcdc-reg10 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vcc_1v8_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ avcc_1v8_s0: pldo-reg1 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "avcc_1v8_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcc_1v8_s0: pldo-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vcc_1v8_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ avdd_1v2_s0: pldo-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "avdd_1v2_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ avcc_3v3_s0: pldo-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "avcc_3v3_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd_s0: pldo-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vccio_sd_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ pldo6_s3: pldo-reg6 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "pldo6_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vdd_0v75_s3: nldo-reg1 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "vdd_0v75_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <750000>;
++ };
++ };
++
++ avdd_ddr_pll_s0: nldo-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <850000>;
++ regulator-max-microvolt = <850000>;
++ regulator-name = "avdd_ddr_pll_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <850000>;
++ };
++ };
++
++ avdd_0v75_s0: nldo-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "avdd_0v75_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ avdd_0v85_s0: nldo-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <850000>;
++ regulator-max-microvolt = <850000>;
++ regulator-name = "avdd_0v85_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_0v75_s0: nldo-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "vdd_0v75_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++};
++
++&tsadc {
++ status = "okay";
++};
++
++&u2phy2 {
++ status = "okay";
++};
++
++&u2phy2_host {
++ phy-supply = <&vcc5v0_host_20>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-0 = <&uart2m0_xfer>;
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
Index: sysutils/u-boot/rk3588/patches/patch-configs_nanopi-r6s-rk3588s_defconfig
===================================================================
RCS file:
sysutils/u-boot/rk3588/patches/patch-configs_nanopi-r6s-rk3588s_defconfig
diff -N
sysutils/u-boot/rk3588/patches/patch-configs_nanopi-r6s-rk3588s_defconfig
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ sysutils/u-boot/rk3588/patches/patch-configs_nanopi-r6s-rk3588s_defconfig
20 Feb 2024 21:31:33 -0000
@@ -0,0 +1,93 @@
+Index: configs/nanopi-r6s-rk3588s_defconfig
+--- configs/nanopi-r6s-rk3588s_defconfig.orig
++++ configs/nanopi-r6s-rk3588s_defconfig
+@@ -0,0 +1,89 @@
++CONFIG_ARM=y
++CONFIG_SKIP_LOWLEVEL_INIT=y
++CONFIG_COUNTER_FREQUENCY=24000000
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_TEXT_BASE=0x00a00000
++CONFIG_SPL_LIBCOMMON_SUPPORT=y
++CONFIG_SPL_LIBGENERIC_SUPPORT=y
++CONFIG_NR_DRAM_BANKS=2
++CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
++CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
++CONFIG_DEFAULT_DEVICE_TREE="rk3588s-nanopi-r6s"
++CONFIG_ROCKCHIP_RK3588=y
++CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
++CONFIG_SPL_SERIAL=y
++CONFIG_SPL_STACK_R_ADDR=0x600000
++CONFIG_TARGET_EVB_RK3588=y
++CONFIG_SPL_STACK=0x400000
++CONFIG_DEBUG_UART_BASE=0xFEB50000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_SYS_LOAD_ADDR=0xc00800
++CONFIG_PCI=y
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_SPL_FIT_SIGNATURE=y
++CONFIG_SPL_LOAD_FIT=y
++CONFIG_LEGACY_IMAGE_FORMAT=y
++CONFIG_OF_BOARD_SETUP=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-nanopi-r6s.dtb"
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++CONFIG_SPL_MAX_SIZE=0x40000
++CONFIG_SPL_PAD_TO=0x7f8000
++CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
++CONFIG_SPL_BSS_START_ADDR=0x4000000
++CONFIG_SPL_BSS_MAX_SIZE=0x4000
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_ATF=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_REGULATOR=y
++# CONFIG_SPL_DOS_PARTITION is not set
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_OF_LIVE=y
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
++CONFIG_SPL_DM_SEQ_ALIAS=y
++CONFIG_SPL_REGMAP=y
++CONFIG_SPL_SYSCON=y
++CONFIG_SPL_CLK=y
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_MISC=y
++CONFIG_SUPPORT_EMMC_RPMB=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_PHY_REALTEK=y
++CONFIG_DWC_ETH_QOS=y
++CONFIG_DWC_ETH_QOS_ROCKCHIP=y
++CONFIG_PCIE_DW_ROCKCHIP=y
++CONFIG_PHY_ROCKCHIP_INNO_USB2=y
++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
++CONFIG_PHY_ROCKCHIP_USBDP=y
++CONFIG_SPL_PINCTRL=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_SPL_RAM=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYS_NS16550_MEM32=y
++CONFIG_SYSRESET=y
++CONFIG_USB=y
++CONFIG_DM_USB_GADGET=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_USB_DWC3_GENERIC=y
++CONFIG_ERRNO_STR=y
Index: sysutils/u-boot/rk3588/pkg/PLIST
===================================================================
RCS file: /cvs/ports/sysutils/u-boot/rk3588/pkg/PLIST,v
retrieving revision 1.1
diff -u -p -r1.1 PLIST
--- sysutils/u-boot/rk3588/pkg/PLIST 26 Nov 2023 21:06:26 -0000 1.1
+++ sysutils/u-boot/rk3588/pkg/PLIST 20 Feb 2024 21:31:33 -0000
@@ -7,6 +7,14 @@ share/u-boot/nanopc-t6-rk3588/u-boot-roc
@comment share/u-boot/nanopc-t6-rk3588/u-boot.bin
@comment share/u-boot/nanopc-t6-rk3588/u-boot.img
@comment share/u-boot/nanopc-t6-rk3588/u-boot.itb
+share/u-boot/nanopi-r6s-rk3588s/
+@comment share/u-boot/nanopi-r6s-rk3588s/idbloader.img
+@comment share/u-boot/nanopi-r6s-rk3588s/u-boot
+share/u-boot/nanopi-r6s-rk3588s/u-boot-rockchip.bin
+@comment share/u-boot/nanopi-r6s-rk3588s/u-boot-spl.bin
+@comment share/u-boot/nanopi-r6s-rk3588s/u-boot.bin
+@comment share/u-boot/nanopi-r6s-rk3588s/u-boot.img
+@comment share/u-boot/nanopi-r6s-rk3588s/u-boot.itb
share/u-boot/orangepi-5-plus-rk3588/
@comment share/u-boot/orangepi-5-plus-rk3588/idbloader.img
@comment share/u-boot/orangepi-5-plus-rk3588/u-boot
