Hi, attached a looong overdue update of Kismet. This is a whole rewrite, and more or less a complete new software, compared to the nearly 10 year old version we currently have. Besides Wifi, now a lot of other wireless protocols can be detected.
Tested capture sources:
* OpenBSD Wifi (tested with athn)
* NRF51822 (BTLE) (tested with with a Adafruit BTLE Friend, with NordicRF
Sniffer firmware)
* RTL ADSB (tested with RTL-SDR Blog v3)
* RTL 433 (tested with RTL-SDR Blog v3)
Many other protocols are enabled, but untested, due to lack of hardware.
Below configure summary of what's enabled/supported:
Configuration complete:
Compiling for: openbsd7.8 (x86_64)
C++ Library: stdc++
Protobuf Library: disabled
Installing as group: wheel
Installing into: /usr/local
Setuid group: _kismet Prelude SIEM : no
PCRE regex: libpcre2
Websocket datasources: yes
LibCapability (enhanced
privilege dropping): n/a (only Linux)
Linux Wi-Fi capture : n/a (only Linux)
Linux Netlink: n/a (only Linux)
Linux NetworkManager: n/a (only Linux)
Linux HCI Bluetooth: n/a (only Linux)
OpenBSD Wi-Fi capture: yes
OSX/Darwin capture : n/a (only OSX/Darwin)
nRF MouseJack: yes
TI CC 2540 BTLE: yes
TI CC 2531 Zigbee: yes
Ubertooth One: no (libubertooth, libbtbb, or libusb-1.0 not
available)
NRF51822 BTLE: yes
NRF52840 Zigbee: yes
NXP KW41Z BLE/Zigbee: yes
Freaklabs Zigbee V2: yes
RZ KILLERBEE: yes
RADVIEW Serial: yes
Radiacode USB: yes
Python Modules: no (deprecated)
RTL-SDR RTL_433 V2: yes
RTL-SDR ADSB V2: yes
ANTSDR DroneID: yes
bladeRF-wiphy: no (bladeRF support not explicitly enabled)
Hak5 WiFi Coconut: no (Hak5 WiFi Coconut not explicitly enabled)
lm-sensors monitoring: n/a (only Linux)
Built-in Debug: partial - Missing libdw or libbfd will not print
full stacks on crash
it requires the new comms/rtl_433 port I sent previously Today to ports@ as
RUN_DEPENDS.
patch attached.
Any feedback, test reports etc. or even OKs welcome.
cheers,
Sebastian
kismet-2025.diff
Description: Binary data
