2026-06-26T15:44:35+0000 Johannes Thyssen Tishman <[email protected]>:
> 2026-06-23T18:20:54-0700 Andrew Hewus Fresh <[email protected]>:
> > This brings OpenSCAD up to a recent nightly. I was running one from
> > April for quite a while, but have tested this one lightly and haven't
> > noticed any fallout.
> >
> > https://github.com/openscad/openscad/commits/master/
> >
> > Comments, tests, OK?
>
> The following is printed on 'make plist':
> LIB_DEPENDS graphics/glew not needed for cad/openscad ?
>
> I took a closer look and found the following comment and options in
> CMakeLists.txt:
>
> # For now, we'll default to whatever OpenCSG uses (>=1.6 -> GLAD, <1.6 ->
> GLEW)
> option(USE_GLAD "Use GLAD. Mutually exclusive from USE_GLEW" OFF)
> option(USE_GLEW "Use GLEW. Mutually exclusive from USE_GLAD" OFF)
>
> Since I built with your OpenCSG update (1.8.2), the following is printed
> during configuration time:
>
> -- USE_GLAD/USE_GLEW not specified: Defaulting to GLAD
>
> However I do not have glad installed on the machine I tested on. Perhaps
> the library is bundled? Could you please take a look at this?
>
> Regardless, OpenSCAD builds and starts fine. I loaded a couple of the
> built-in examples and saw no issues. With the above nit clarified, ok
> jtt@.
>
> Note, that I did not test if this update builds without updating OpenCSG
> and manifold or viceversa, so these should probably go in together.
Forgot to mention that I wasn't able to run the tests as I build-tested
in a chroot and couldn't yet figure out how to make the display work.
Are they passing for you?
> > Index: Makefile
> > ===================================================================
> > RCS file: /cvs/ports/cad/openscad/Makefile,v
> > diff -u -p -r1.61 Makefile
> > --- Makefile 23 Apr 2026 07:51:18 -0000 1.61
> > +++ Makefile 24 Jun 2026 01:19:29 -0000
> > @@ -1,8 +1,7 @@
> > COMMENT = programmers solid 3D CAD modeller
> >
> > -V = 2026.02.24
> > +V = 2026.06.21
> > DISTNAME = openscad-${V}
> > -REVISION = 0
> >
> > CATEGORIES = cad
> >
> > @@ -13,7 +12,7 @@ PERMIT_PACKAGE = Yes
> >
> > GH_ACCOUNT = openscad
> > GH_PROJECT = openscad
> > -GH_COMMIT = 665ba242e8b61aee10a4b09af94c094e1eb354f8
> > +GH_COMMIT = fb3d125fc17debb48080cd3551e944fcb8d97701
> >
> > MCAD_COMMIT = 1ea402208c3127ffb443931e9bb1681c191dacca
> > SITES.mcad = https://github.com/${GH_ACCOUNT}/MCAD/archive/
> > @@ -24,13 +23,14 @@ MODULES = devel/cmake \
> > lang/python \
> > x11/qt6
> >
> > -WANTLIB += ${COMPILER_LIBCXX} 3mf Clipper2 EGL GL GLEW GLU Qt6Concurrent
> > +WANTLIB += ${COMPILER_LIBCXX} 3mf Clipper2 EGL GL GLU Qt6Concurrent
> > WANTLIB += Qt6Core Qt6Core5Compat Qt6DBus Qt6Gui Qt6Multimedia
> > WANTLIB += Qt6Network Qt6OpenGL Qt6OpenGLWidgets Qt6Svg Qt6Widgets
> > -WANTLIB += boost_atomic-mt boost_filesystem-mt boost_program_options-mt
> > -WANTLIB += boost_regex-mt c cairo double-conversion
> > -WANTLIB += fontconfig freetype glib-2.0 gmp gmpxx harfbuzz intl
> > -WANTLIB += m manifold mpfr opencsg qscintilla2_qt6 tbb xml2 zip
> > +WANTLIB += X11 boost_atomic-mt boost_container-mt boost_filesystem-mt
> > +WANTLIB += boost_program_options-mt boost_regex-mt c cairo crypto
> > +WANTLIB += double-conversion fontconfig freetype glib-2.0 gmp
> > +WANTLIB += gmpxx harfbuzz intl m manifold mpfr opencsg qscintilla2_qt6
> > +WANTLIB += ssl tbb xml2 zip
> >
> > # Match devel/boost
> > COMPILER = base-clang ports-gcc
> > Index: distinfo
> > ===================================================================
> > RCS file: /cvs/ports/cad/openscad/distinfo,v
> > diff -u -p -r1.9 distinfo
> > --- distinfo 6 Apr 2026 02:28:34 -0000 1.9
> > +++ distinfo 24 Jun 2026 01:19:29 -0000
> > @@ -1,4 +1,4 @@
> > SHA256 (MCAD-1ea40220.tar.gz) =
> > PQQHfTaYFGOMPwGP7MOUOQEaR/VFAm9DwaRlvOF3P1c=
> > -SHA256 (openscad-2026.02.24-665ba242.tar.gz) =
> > zRqlHFp/2Puc15m+Hvuv3kZKIzqJliUUU6L9nmlfq30=
> > +SHA256 (openscad-2026.06.21-fb3d125f.tar.gz) =
> > I6qVF/HgTFC6GL+odttHnAtiwI8CJIAF9N1lmk/zwm4=
> > SIZE (MCAD-1ea40220.tar.gz) = 56943
> > -SIZE (openscad-2026.02.24-665ba242.tar.gz) = 25351660
> > +SIZE (openscad-2026.06.21-fb3d125f.tar.gz) = 25409018
> > Index: patches/patch-CMakeLists_txt
> > ===================================================================
> > RCS file: /cvs/ports/cad/openscad/patches/patch-CMakeLists_txt,v
> > diff -u -p -r1.2 patch-CMakeLists_txt
> > --- patches/patch-CMakeLists_txt 6 Apr 2026 02:28:34 -0000 1.2
> > +++ patches/patch-CMakeLists_txt 24 Jun 2026 01:19:29 -0000
> > @@ -1,7 +1,15 @@
> > Index: CMakeLists.txt
> > --- CMakeLists.txt.orig
> > +++ CMakeLists.txt
> > -@@ -527,10 +527,10 @@ else()
> > +@@ -461,6 +461,7 @@ macro(find_graphics)
> > + set(GLEW_SOURCES src/glview/glew-utils.cc)
> > + endif()
> > +
> > ++ set(OPENGL_glx_LIBRARY /usr/X11R6/lib/modules/extensions/libglx.so)
> > + find_package(OpenGL REQUIRED QUIET)
> > + target_link_libraries(OpenSCADLibInternal PUBLIC ${OPENGL_LIBRARIES})
> > + message(STATUS "OpenGL: ${OPENGL_LIBRARIES}")
> > +@@ -528,10 +529,10 @@ else()
> > target_link_libraries(svg PUBLIC Eigen3::Eigen)
> > message(STATUS "Eigen: ${Eigen3_VERSION}")
> >
> > @@ -14,7 +22,7 @@ Index: CMakeLists.txt
> > target_link_libraries(svg PUBLIC Boost::headers)
> >
> > find_package(HarfBuzz 0.9.19 REQUIRED QUIET)
> > -@@ -693,7 +693,7 @@ if(ENABLE_CAIRO STREQUAL "AUTO")
> > +@@ -694,7 +695,7 @@ if(ENABLE_CAIRO STREQUAL "AUTO")
> > if(CAIRO_VERSION OR CAIRO_FOUND)
> > message(STATUS "Cairo: ${CAIRO_VERSION}")
> > target_include_directories(OpenSCADLibInternal SYSTEM PUBLIC
> > ${CAIRO_INCLUDE_DIRS})
> > @@ -23,7 +31,7 @@ Index: CMakeLists.txt
> > target_compile_definitions(OpenSCADLibInternal PUBLIC ENABLE_CAIRO)
> > else()
> > message(STATUS "Cairo: disabled (not found)")
> > -@@ -957,7 +957,7 @@ elseif(UNIX)
> > +@@ -958,7 +959,7 @@ elseif(UNIX)
> > if (NOT USE_GLAD)
> > target_compile_definitions(OpenSCADLibInternal PUBLIC GLEW_EGL)
> > endif()
> > @@ -32,8 +40,8 @@ Index: CMakeLists.txt
> > endif()
> > if(ENABLE_GLX AND OpenGL_GLX_FOUND)
> > target_compile_definitions(OpenSCADLibInternal PUBLIC ENABLE_GLX)
> > -@@ -1260,11 +1260,6 @@ else()
> > - ${GLEW_SOURCES})
> > +@@ -1267,11 +1268,6 @@ else()
> > + endif()
> > endif()
> >
> > -
> >
>
