Currently running 4.4-RELEASE on a Dell Inspiron 1501 laptop (dmesg
attached). I'm using rlwrap to run ij (the Apache Derby command-line
interface) and I get an error when I quit it using ^D:
rlwrap: error: read error on master pty: Interrupted system call
Additionally, I can't backspace; pressing <BS> does nothing. Typing
^V <BS> prints out ^? which confirms that it's the same as it is in my
shell (bash running under xterm [Xresources file attached - but same
behaviour occurs after running `xrdb -remove`]).
To make sure it wasn't something ij was doing, I tried the same thing
with python2.5 -- I still cannot backspace, but there is no error
message about an interrupted system call. The version of rlwrap is
rlwrap-0.28 installed from packages. There are no messages in the
Xorg log or anywhere else that I can find.
Thanks for your time and any ideas,
--
Taylor Christopher Venable
http://real.metasyntax.net:2357/
How many shells could Shell sort
sort if Shell sort could sort shells?
!!
!! XTerm configuration (using VT100 emulation).
!!
xterm.vt100.background: black
xterm.vt100.cursorBlink: true
xterm.vt100.cursorColor: white
xterm.vt100.font: -misc-fixed-medium-r-normal--13-120-75-75-c-70-iso8859-1
xterm.vt100.utf8: 1
xterm.vt100.utf8Fonts.font:
-misc-fixed-medium-r-normal--13-120-75-75-c-70-iso10646-1
xterm.vt100.foreground: white
xterm.vt100.geometry: 120x40
xterm.vt100.metaSendsEscape: true
xterm.vt100.saveLines: 1000
xterm.vt100.scrollBar: true
xterm.vt100.scrollBarBorder: 0
xterm.vt100.showMissingGlyphs: true
xterm.vt100.scrollbar.translations:#override \n\
<Btn5Down>:StartScroll(Forward) \n\
<Btn1Down>:StartScroll(Continuous) MoveThumb() NotifyThumb() \n\
<Btn4Down>:StartScroll(Backward) \n\
<Btn1Motion>:MoveThumb() NotifyThumb() \n\
<BtnUp>:NotifyScroll(Proportional) EndScroll()
xterm.vt100.scrollbar.thumb: black
xterm.vt100.scrollbar.width: 8
xterm.vt100.scrollbar.foreground: gray50
xterm.vt100.scrollbar.background: black
xterm.vt100.termName: xterm-color
xterm.vt100.translations: #override \n\
<Key>Delete:string(0x1b) string("[3~")
!!
!! XClock Configuration
!!
XClock*foreground: white
XClock*background: black
XClock*analog: true
XClock*render: true
XClock*hourColor: gray75
XClock*minuteColor: gray75
XClock*secondColor: \#A00000
XClock*majorColor: red
XClock*minorColor: gray75
XClock*update: 60
XClock*geometry: 200x200-0+0
XLoad*jumpscroll: 1
XLoad*update: 10
XLoad*background: black
XLoad*foreground: \#006000
XLoad*label:
XLoad*highlight: \#00E000
XLoad*geometry: 200x100-0-0
!!
!! XLock configuration.
!!
XLock.description: off
XLock.echokey: *
XLock.echokeys: on
XLock.font: -dec-terminal-bold-r-normal--14-140-75-75-c-80-iso8859-1
XLock.mode: blank
XLock.password:
XLock.planfont: -dec-terminal-bold-r-normal--14-140-75-75-c-80-iso8859-1
XLock.usefirst: false
XLock.username:
Xft.antialias: 1
Xft.hintstyle: hintfull
Emacs.font: DejaVu Sans Mono-10
Emacs*FontBackend: xft,x
*fontList: -dec-terminal-medium-r-normal--14-140-75-75-c-80-iso8859-1
nedit.stdOpenDialog: true
OpenBSD 4.4 (GENERIC.MP) #844: Tue Aug 12 17:24:39 MDT 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 ("AuthenticAMD" 686-class,
256KB L2 cache) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
real mem = 937447424 (894MB)
avail mem = 897708032 (856MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/15/07, BIOS32 rev. 0 @ 0xfdc84, SMBIOS
rev. 2.4 @ 0xf0470 (37 entries)
bios0: vendor Dell Inc. version "2.3.0" date 03/15/2006
bios0: Dell Inc. Inspiron 1501
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP TCPA SSDT APIC MCFG HPET SLIC
acpi0: wakeup devices PB2_(S4) PB3_(S4) PB5_(S4) PB6_(S4) OHC1(S0) OHC2(S0)
OHC3(S0) OHC4(S0) OHC5(S0) EHCI(S0) P2P_(S5) MODM(S3) SLPB(S4) LID_(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 ("AuthenticAMD" 686-class,
256KB L2 cache) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus 2 (PB5_)
acpiprt4 at acpi0: bus -1 (PB6_)
acpiprt5 at acpi0: bus 8 (P2P_)
acpiprt6 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature 110 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID_
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "DELLRD8507" serial 4165 type LION oem "SIMPLO"
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xd000 0xcd000/0x1000
cpu0: PowerNow! K8 1597 MHz: speeds: 1600 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200M" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
ppb1 at pci0 dev 5 function 0 "ATI RS480 PCIE" rev 0x00
pci2 at ppb1 bus 2
ahci0 at pci0 dev 18 function 0 "ATI IXP600 SATA" rev 0x00: apic 2 int 22 (irq
11), AHCI 1.1
scsibus0 at ahci0: 32 targets, initiator 32
sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK1234GS, AH00> SCSI3 0/direct fixed
sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec total
ohci0 at pci0 dev 19 function 0 "ATI IXP600 USB" rev 0x00: apic 2 int 16 (irq
10), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI IXP600 USB" rev 0x00: apic 2 int 17 (irq
11), version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI IXP600 USB" rev 0x00: apic 2 int 18 (irq
11), version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI IXP600 USB" rev 0x00: apic 2 int 17 (irq
11), version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI IXP600 USB" rev 0x00: apic 2 int 18 (irq
11), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI IXP600 USB2" rev 0x00: apic 2 int 19 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI IXPx00 SMBus" rev 0x13: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
piixpm0: exec: op 1, addr 0x55, cmdlen 1, len 0, flags 0x08: timeout, status
0x9<BUSY,BUSERR>
pciide0 at pci0 dev 20 function 1 "ATI IXP600 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L632D, DE04> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
azalia0 at pci0 dev 20 function 2 "ATI IXPx00 HD Audio" rev 0x00: apic 2 int 16
(irq 10)
azalia0: codec[s]: Conexant/0x2bfa, Sigmatel STAC9200, using Sigmatel STAC9200
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI IXP600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI IXP600 PCI" rev 0x00
pci3 at ppb2 bus 8
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: apic 2 int 21 (irq
10), address 00:19:b9:6b:fc:89
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
sdhc0 at pci3 dev 1 function 0 "Ricoh 5C822 SD/MMC" rev 0x19: apic 2 int 20
(irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x01 at pci3 dev 1 function 1 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
BH-F2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Microsoft Basic Optical
Mouse" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
