Hello guys,
I am trying to install rt-3.6.3p1 on fresh installed 4.4 stable (dmesg
at the bottom).
When I try to install it from ports it stops at gd-2.0.35 with these errors:
Stop in /usr/ports/graphics/gd/w-gd-2.0.35/gd-2.0.35 (line 629 of Makefile).
*** Error code 1
Stop in /usr/ports/graphics/gd/w-gd-2.0.35/gd-2.0.35 (line 690 of Makefile).
*** Error code 1
Stop in /usr/ports/graphics/gd/w-gd-2.0.35/gd-2.0.35 (line 352 of Makefile).
*** Error code 1
If you need I can post the whole screen, I try not to waist space here.
When I use pkg_add -v it exits with this error:
/usr/local/bin/gdlib-config (different md5)
/usr/sbin/pkg_add: fatal issues in installing gd-2.0.35
I am new to ports so am I doing something wrong or the port/package
gd-2.0.35 is broken?
I would really appreciate your help.
Thank you,
Ivo
PS dmesg:
/usr/ports/www/rt # dmesg
OpenBSD 4.4-stable (GENERIC.MP) #1: Sun Dec 28 20:35:53 EET 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 552 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 804868096 (767MB)
avail mem = 769257472 (733MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/08/99, BIOS32 rev. 0 @ 0xf0530
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdb2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0d20/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5800 0xd0000/0x1000 0xd4000/0x1000
mainbus0: Intel MP Specification (Version 1.1)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 100MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 552 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3D Labs Permedia 3" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xe7800000, size 0x800000
drm at vga1 unsupported
piixpcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TRANSCEND>
wd0: 1-sector PIO, LBA, 123MB, 252000 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: apic 2 int
19 (irq 12)
piixpm0 at pci0 dev 4 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
lm1 at iic0 addr 0x2d: W83781D
spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL3
spdmem1 at iic0 addr 0x51: 256MB SDRAM non-parity PC133CL3
spdmem2 at iic0 addr 0x52: 256MB SDRAM non-parity PC133CL2
spdmem3 at iic0 addr 0x53: 256MB SDRAM non-parity PC133CL2
ahc0 at pci0 dev 6 function 0 "Adaptec AIC-7890/1 U2" rev 0x00: apic 2
int 19 (irq 12)
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST39204LW, 0002> SCSI3 0/direct
fixed
sd0: 8750MB, 14384 cyl, 3 head, 415 sec, 512 bytes/sec, 17921835 sec total
em0 at pci0 dev 9 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic
2 int 19 (irq 12), address 00:07:e9:a0:0c:dd
em1 at pci0 dev 11 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02:
apic 2 int 17 (irq 10), address 00:07:e9:a0:13:d7
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83781D
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
apm0: disconnected
softraid0 at root
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x3f
root on sd0a swap on sd0b dump on sd0b
/usr/ports/www/rt #
