I install KDE4 and have error (install abort)
/usr/ports/x11/kde4/edu/w-kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp: In
   member function `QPointF View::toPixel(const QPointF&, View::ClipBehaviour,
   const QPointF&)':
/usr/ports/x11/kde4/edu/w-kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp:434:
 error: `
   isnan' undeclared (first use this function)
/usr/ports/x11/kde4/edu/w-kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp:434:
 error: (Each
   undeclared identifier is reported only once for each function it appears
   in.)
/usr/ports/x11/kde4/edu/w-kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp:454:
 error: `
   isinf' undeclared (first use this function)


# uname -a
OpenBSD main 4.5 GENERIC#0 i386

# dmesg
OpenBSD 4.5-stable (GENERIC) #0: Thu Jun 11 03:53:35 MSD 2009
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 665 MHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem  = 132476928 (126MB)
avail mem = 119799808 (114MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/22/01, BIOS32 rev. 0 @ 0xfda74, SMBIOS 
rev. 2.3 @ 0xf0ea0 (55 entries)
bios0: vendor Intel Corp. version "CA81020A.86A.0017.P08.0103221311" date 
03/22/2001
bios0: Intel Corporation CA810E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf30f0/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1000 0xcd000/0x1000 0xce000/0x1000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E Host" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810E Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: irq 10, address 
00:90:27:f1:38:13
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
eap0 at pci1 dev 7 function 0 "Ensoniq AudioPCI97" rev 0x06: irq 11
ac97: codec id 0x43525903 (Cirrus Logic CS4297 rev 3)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
fxp1 at pci1 dev 8 function 0 "Intel 8255x" rev 0x05, i82558: irq 11, address 
00:90:27:1d:66:ab
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02: 24-bit timer 
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3160815A>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 10
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 9
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask f765 netmask ff65 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
pppoe0: host unique tag found, but it belongs to a connection in state 3
pppoe: received PADO but could not find request for it


What can i do?

Reply via email to