On 2010/01/17 13:05, Michael Lechtermann wrote: > Hi, > > I've tried to build several packages on sparc64 current, but glib2 > doesn't want to build. Any ideas?
If it's already installed, remove it first. This is the number 1 cause of 'undefined reference to ...' errors. > /usr/ports/pobj/glib-2.22.4/glib-2.22.4/glib/tests/testing.c:206: > undefined reference to `g_test_log_set_fatal_handler' > testing.o(.text+0x1794):/usr/ports/pobj/glib-2.22.4/glib-2.22.4/glib/tests/testing.c:210: > undefined reference to `g_test_log_set_fatal_handler' > collect2: ld returned 1 exit status > gmake[4]: *** [testing] Error 1 > gmake[4]: Leaving directory > `/usr/ports/pobj/glib-2.22.4/glib-2.22.4/glib/tests' > gmake[3]: *** [all-recursive] Error 1 > gmake[3]: Leaving directory `/usr/ports/pobj/glib-2.22.4/glib-2.22.4/glib' > gmake[2]: *** [all] Error 2 > gmake[2]: Leaving directory `/usr/ports/pobj/glib-2.22.4/glib-2.22.4/glib' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory `/usr/ports/pobj/glib-2.22.4/glib-2.22.4' > gmake: *** [all] Error 2 > *** Error code 2 > > Stop in /usr/ports/devel/glib2 (line 2193 of > /usr/ports/infrastructure/mk/bsd.port.mk). > *** Error code 1 > > Stop in /usr/ports/devel/glib2 (line 1448 of > /usr/ports/infrastructure/mk/bsd.port.mk). > *** Error code 1 > > Stop in /usr/ports/devel/glib2 (line 1988 of > /usr/ports/infrastructure/mk/bsd.port.mk). > > > > > OpenBSD 4.6-current (GENERIC) #0: Fri Jan 15 10:39:06 CET 2010 > r...@************:/usr/src/sys/arch/sparc64/compile/GENERIC > real mem = 268435456 (256MB) > > avail mem = 247955456 (236MB) > > mainbus0 at root: Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 400MHz) > > cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 400 MHz > > cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K > external (64 b/l) > psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign > 7c0 > psycho0: bus range 0-2, PCI bus 0 > > psycho0: dvma map c0000000-dfffffff > > pci0 at psycho0 > > ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 > pci1 at ppb0 bus 1 > ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 > auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, > 72c000-72c003, 72f000-72f003 > power0 at ebus0 addr 724000-724003 ivec 0x25 > "SUNW,pll" at ebus0 addr 504000-504002 not configured > sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2 > sabtty0 at sab0 port 0 > sabtty1 at sab0 port 1 > comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: layout 37 > wskbd0 at comkbd0: console keyboard > comms0 at ebus0 addr 3062f8-3062ff ivec 0x2a > wsmouse0 at comms0 mux 0 > lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ivec > 0x22: polled > "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ivec > 0x27 not configured > clock1 at ebus0 addr 0-1fff: mk48t59 > "flashprom" at ebus0 addr 0-fffff not configured > audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, > 722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0 > audio0 at audioce0 > hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address > 08:00:20:f9:10:f6 > nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 > machfb0 at pci1 dev 2 function 0 "ATI Mach64" rev 0x5c > machfb0: ATY,GT-C, 1152x900 > wsdisplay0 at machfb0 mux 1: console (std, sun emulation), using wskbd0 > pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x7e0 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST320420A> > wd0: 16-sector PIO, LBA, 19458MB, 39851760 sectors > wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > probe(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 > SENSE KEY: Unit Attention > ASC/ASCQ: Power On, Reset, or Bus Device Reset Occurred > probe(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 > SENSE KEY: Not Ready > ASC/ASCQ: Medium Not Present > cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8483B, 1.00> ATAPI 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 > pci2 at ppb1 bus 2 > ahc0 at pci2 dev 1 function 0 "Adaptec AHA-2940" rev 0x00: ivec 0x7d0 > scsibus1 at ahc0: 8 targets, initiator 7 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > bootpath: /p...@1f,0/p...@1,1/i...@3,0/d...@0,0 > root on wd0a swap on wd0b dump on wd0b >
