hi there,
i am just after a recent update to -current
and i noticed that i cannot start vlc,
unless i kill of the dbus processes it spawned.
also, if the dbus thingie is running while
closing vlc, it never quits "properly",
just stays there hanging.
is anyone seeing this?
OpenBSD 4.7-current (RAMDISK_CD) #465: Thu Jun 10 00:32:46 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 527527936 (503MB)
avail mem = 503685120 (480MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/11/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06e0 (37 entries)
bios0: vendor American Megatrends Inc. version "1302" date 03/11/2009
bios0: ASUSTeK Computer INC. 701
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB MCFG
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 70MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
bios0: ROM list: 0xc0000/0xf800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
"Intel 82801FB HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
(irq 5)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
(irq 11)
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 int 17
(irq 11), address 71:ec:da:32:72:24
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI
0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18
(irq 10)
pci3 at ppb2 bus 1
iwn0 at pci3 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: apic 1
int 18 (irq 10), MIMO 2T3R, MoW2, address 00:21:5c:04:9e:19
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
(irq 7)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
(irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
(irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk Corporation U3
Cruzer Micro" rev 2.00/0.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct
removable
sd0: 3919MB, 512 bytes/sec, 8027789 sec total
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Areson USB Device" rev
1.10/0.01 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Areson USB Device" rev
1.10/0.01 addr 2
uhidev1: iclass 3/0, 1 report id
uhid at uhidev1 reportid 1 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 4.7-current (GENERIC) #28: Thu Jun 10 00:17:32 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 527527936 (503MB)
avail mem = 501547008 (478MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/11/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06e0 (37 entries)
bios0: vendor American Megatrends Inc. version "1302" date 03/11/2009
bios0: ASUSTeK Computer INC. 701
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB MCFG
acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) MC97(S4)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 70MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 90 degC
acpibat0 at acpi0: BAT0 model "701" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRTD
acpivout1 at acpivideo0: TVOD
acpivout2 at acpivideo0: LCDD
bios0: ROM list: 0xc0000/0xf800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 5)
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: apic 1 int
16 (irq 5)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
(irq 5)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
(irq 11)
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 int 17
(irq 11), address 71:ec:da:32:72:24
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI
0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18
(irq 10)
pci3 at ppb2 bus 1
iwn0 at pci3 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: apic 1
int 18 (irq 10), MIMO 2T3R, MoW2, address 00:21:5c:04:9e:19
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
(irq 7)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
(irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
(irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
(irq 0)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk Corporation U3
Cruzer Micro" rev 2.00/0.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct
removable
sd0: 3919MB, 512 bytes/sec, 8027789 sec total
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Areson USB Device" rev
1.10/0.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Areson USB Device" rev
1.10/0.01 addr 2
uhidev1: iclass 3/0, 1 report id
uhid0 at uhidev1 reportid 1: input=7, output=7, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
can't have everything. where would you put it?
