On 2015/01/05 15:52, Bruno Flueckiger wrote:
> On 04.01.2015 23:09, Landry Breuil wrote:
> >
> >With what provider did you tested it, was it rtp only or also rtsp ? i
> >might be interested in that, if it allows one to simplify the mess that
> >is streaming multiple channels at the same time to different clients...
> >Also, a port would be welcome :)
> >
> >Landry
>
> I've tested it with IPTV from Swisscom (http://www.swisscom.ch). AFAIK
> they don't make use of RTSP. The streams are delivered by RTP. Every
> stream from Swisscom has a different multicast IP, so I guess there is no
> need for RTSP on their side.
>
> I start the work on the port. Might take some time to complete because I
> first have to read the porting guide in depth ;)
>
> Bruno
>
Here's a bit to get you started because they use weird naming:
V= 1.0.23-9
DISTNAME= udpxy.$V
EXTRACT_SUFX= -prod.tar.gz
PKGNAME= udpxy-${V:S/-/./}
WRKDIST= ${WRKDIR}/udpxy-$V
You'll need to use gmake, and I suggest writing your own do-install
rather than patching upstream's install target to work (in this case
it's a simple target and unlikely to change much in future) - look
for other examples using do-install in the ports tree to crib from.
