On Tue, Oct 20, 2015 at 10:50 AM, Jan Stary <[email protected]> wrote: > On Oct 20 10:49:32, [email protected] wrote: >> This is current/macppc on an old eMac (dmesg delow), > > [ using 555888 bytes of bsd ELF symbol table ] > console out [NVDA,Display-A] console in [keyboard], using USB > using parent NVDA,Parent:: memaddr 98000000, size 8000000 : consaddr 98004000 > : ioaddr 91000000, size 1000000: width 1280 linebytes 1536 height 960 depth 8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.8-current (GENERIC) #749: Thu Oct 15 02:36:49 MDT 2015 > [email protected]:/usr/src/sys/arch/macppc/compile/GENERIC > real mem = 1073741824 (1024MB) > avail mem = 1029042176 (981MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: model PowerMac4,4 > cpu0 at mainbus0: 7450 (Revision 0x201): 700 MHz: 256KB L2 cache > mem0 at mainbus0 > spdmem0 at mem0: 512MB SDRAM non-parity PC133CL2 > spdmem1 at mem0: 512MB SDRAM non-parity PC133CL3 > memc0 at mainbus0: uni-n rev 0x11 > kiic0 at memc0 offset 0xf8001000 > iic0 at kiic0 > mpcpcibr0 at mainbus0 pci: uni-north > pci0 at mpcpcibr0 bus 0 > pchb0 at pci0 dev 11 function 0 "Apple Uni-N2 AGP" rev 0x00 > vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce2 MX" rev 0xb2 > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > mpcpcibr1 at mainbus0 pci: uni-north > pci1 at mpcpcibr1 bus 0 > macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03 > openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE > macgpio0 at macobio0 offset 0x50 > macgpio1 at macgpio0 offset 0x59: irq 47 > pgs0 at macgpio0 offset 0x61: irq 55 > "fan" at macgpio0 offset 0x0 not configured > "gpio7" at macgpio0 offset 0x71 not configured > "gpio5" at macgpio0 offset 0x6f not configured > "extint-gpio15" at macgpio0 offset 0x67 not configured > "extint-gpio4" at macgpio0 offset 0x5c not configured > "gpio6" at macgpio0 offset 0x70 not configured > "gpio11" at macgpio0 offset 0x75 not configured > "escc-legacy" at macobio0 offset 0x12000 not configured > zsc0 at macobio0 offset 0x13000: irq 22,23 > zstty0 at zsc0 channel 0 > zstty1 at zsc0 channel 1 > snapper0 at macobio0 offset 0x10000: irq 30,1,2 > "timer" at macobio0 offset 0x15000 not configured > adb0 at macobio0 offset 0x16000 > apm0 at adb0: battery flags 0x9, 0% charged > piic0 at adb0 > iic1 at piic0 > "imic5002" at iic1 addr 0xe8 not configured > "imic5003" at iic1 addr 0xea not configured > "ivad-2" at iic1 addr 0x146 not configured > "ivad-eeprom" at iic1 addr 0x153 not configured > "ivad-pwm" at iic1 addr 0x14c not configured > kiic1 at macobio0 offset 0x18000 > iic2 at kiic1 > wdc0 at macobio0 offset 0x1f000 irq 19: DMA > wd0 at wdc0 channel 0 drive 0: <ST340810A> > wd0: 16-sector PIO, LBA, 39073MB, 80022600 sectors > wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 > wdc1 at macobio0 offset 0x20000 irq 20: DMA > atapiscsi0 at wdc1 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-107D, 1.10> ATAPI 5/cdrom > removable > cd0(wdc1:0:0): using BIOS timings, DMA mode 2 > wdc2 at macobio0 offset 0x21000 irq 21: DMA > audio0 at snapper0 > ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0 > ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0 > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb1 at ohci1: USB revision 1.0 > uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > mpcpcibr2 at mainbus0 pci: uni-north > pci2 at mpcpcibr2 bus 0 > "AT&T/Lucent FW322 1394" rev 0x00 at pci2 dev 14 function 0 not configured > gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, address > 00:03:93:c1:1b:d6 > bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB-PS/2 > Optical Mouse" rev 2.00/11.10 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhub2 at uhub1 port 1 "Mitsumi Electric Hub in Apple Extended USB Keyboard" > rev 1.10/4.10 addr 2 > uhidev1 at uhub2 port 3 configuration 1 interface 0 "Mitsumi Electric Apple > Extended USB Keyboard" rev 1.10/4.10 addr 3 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 13 > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev2 at uhub2 port 3 configuration 1 interface 1 "Mitsumi Electric Apple > Extended USB Keyboard" rev 1.10/4.10 addr 3 > uhidev2: iclass 3/0, 3 report ids > uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd > root on wd0a (c8e76da06027160f.a) swap on wd0b dump on wd0b >
And... what???
