Good call! It's ATI Radeon Mobility HD 5470.
I also tried to run chrome via an ssh session which should supposedly get
rid of any direct graphics card optimizations (DRM?). Still the same
failure. Furthermore, I tried to point chrome at an Xvfb and the problem
was still the same. This suggests that graphics cards are less likely to
blame.
It's also been a while since I sent my dmesg, so here it goes.
OpenBSD 5.9 (GENERIC) #1761: Fri Feb 26 01:15:04 MST 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 4277010432 (4078MB)
avail mem = 4143226880 (3951MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F10" date
11/07/2008
bios0: Gigabyte Technology Co., Ltd. EP45-DS3L
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP EUDS HPET MCFG APIC SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
HUB0(S5) UAR1(S1) IGBE(S4) USB0(S1) USB1(S1) USB2(S1) USB3(S1) US31(S1)
USB4(S1) USB5(S1) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000.07 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 333MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus 3 (PEX4)
acpiprt6 at acpi0: bus 4 (PEX5)
acpiprt7 at acpi0: bus 5 (HUB0)
acpicpu0 at acpi0: !C3(100@150 io@0x416), !C2(500@1 io@0x414), C1(1000@1
halt), FVS, 3000, 2000 MHz
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility HD 5470" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: msi
azalia0: no supported codecs
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: msi
azalia1: codecs: Realtek ALC888
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 16 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3400832A>
wd0: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C
(0x3c00), msi, address 00:1f:d0:xx:yy:zz
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCIIt's
also been a while since I sent my dmesg, so here it goes.
pciide1: using apic 2 int 19 for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <ST31000333AS>
wd1: 16-sector PIO, LBA48, 953868MB, 1953523055 sectors
atapiscsi0 at pciide1 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S183L, SB01> ATAPI
5/cdrom removable
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 2
int 18
iic0 at ichiic0
iic0: addr 0x4e 03=42 04=42 12=ff 13=0f 20=0f 26=03 28=83 29=12 2a=12 2b=28
words 00=0000 01=0000 02=0042 03=4242 04=4200 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0x290
uhub8 at uhub2 port 1 "ATEN International product 0x8021" rev 1.10/1.00
addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "P.I. Engineering
product 0x0007" rev 1.10/3.20 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
uhidev1 at uhub8 port 1 configuration 1 interface 1 "P.I. Engineering
product 0x0007" rev 1.10/3.20 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub8 port 1 configuration 1 interface 2 "P.I. Engineering
product 0x0007" rev 1.10/3.20 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (a2b2030a5c34649a.a) swap on wd0b dump on wd0b
radeondrm0: 1920x1200
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
