hello,
when the old openbsd apache went away recently I swapped to apache2
for the one site I have which still needs it, while it works, when it
gets started at boot (or if I wish to restart it), using rc.d or rcctl
will report a failure, but it will start nonetheless. If I use
apachectl2 it starts without issue. Using -d to rcctl produces nothing
obviously wrong (as far as I can tell). My httpd2.conf is barely
changed from the default one shipped (diff below), the only
substantial changes are that mod_rewrite and mod_perl are active and
there is one virtual host (but removing all those does not change the
behavior). Since apache seems happy with the config and it runs, turning up
debugging or syntax checks haven't produced anything useful. I don't know
if there is any additional debugging I can set for rcctl which would be
helpful.
If anybody has any ideas I'd appreciate it, while it's not a huge
issue it's a bit unnerving to see apache2 being reported as not running
each morning in the daily mail.
thanks,
.jh
# rcctl -d start apache2
doing _rc_parse_conf
doing _rc_quirks
apache2_flags empty, using default ><
doing _rc_parse_conf /var/run/rc.d/apache2
doing _rc_quirks
doing rc_check
apache2
doing rc_start
doing _rc_wait start
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing rc_check
doing _rc_rm_runfile
(failed)
# ps auxww | grep httpd
root 4803 0.0 0.2 19940 31124 ?? Ss 2:30PM 0:00.54
httpd2: /usr/local/sbin/httpd2
www 96364 0.0 0.0 19816 3616 ?? I 2:30PM 0:00.05
httpd2: /usr/local/sbin/httpd2
www 92392 0.0 0.0 19816 3656 ?? I 2:30PM 0:00.05
httpd2: /usr/local/sbin/httpd2
www 60610 0.0 0.0 19816 3588 ?? I 2:30PM 0:00.03
httpd2: /usr/local/sbin/httpd2
www 45996 0.0 0.0 19816 3580 ?? I 2:30PM 0:00.05
httpd2: /usr/local/sbin/httpd2
www 90635 0.0 0.0 19816 3548 ?? I 2:30PM 0:00.02
httpd2: /usr/local/sbin/httpd2
root 42612 0.0 0.0 172 364 p2 R+ 2:30PM 0:00.00 grep httpd
# apachectl2 -t
Syntax OK
# diff -u /usr/local/share/examples/apache2/conf/httpd2.conf
/etc/apache2/httpd2.conf
--- /usr/local/share/examples/apache2/conf/httpd2.conf Mon Jun 13
08:19:54 2016
+++ /etc/apache2/httpd2.conf Tue Jun 21 14:28:14 2016
@@ -49,7 +49,7 @@
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
-Listen 80
+Listen 127.0.0.1:80
#
# Dynamic Shared Object (DSO) Support
@@ -172,7 +172,8 @@
#LoadModule speling_module /usr/local/lib/apache2/mod_speling.so
#LoadModule userdir_module /usr/local/lib/apache2/mod_userdir.so
LoadModule alias_module /usr/local/lib/apache2/mod_alias.so
-#LoadModule rewrite_module /usr/local/lib/apache2/mod_rewrite.so
+LoadModule rewrite_module /usr/local/lib/apache2/mod_rewrite.so
+LoadModule perl_module /usr/local/lib/apache2/mod_perl.so
<IfModule unixd_module>
#
@@ -205,7 +206,7 @@
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
#
-ServerAdmin [email protected]
+ServerAdmin [email protected]
#
# ServerName gives the name and port that the server uses to identify
itself.
@@ -214,7 +215,7 @@
#
# If your host doesn't have a registered DNS name, enter its IP
address here.
#
-#ServerName www.example.com:80
+ServerName www.mysite.com
#
# Deny access to the entirety of your server's filesystem. You must
@@ -238,8 +239,8 @@
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
-DocumentRoot "/var/www/htdocs"
-<Directory "/var/www/htdocs">
+DocumentRoot "/var/www/htdocs_www"
+<Directory "/var/www/htdocs_www">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
@@ -290,7 +291,7 @@
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
-ErrorLog "logs/error_log"
+ErrorLog "logs/default/error_apache.log"
#
# LogLevel: Control the number of messages logged to the error_log.
@@ -319,7 +320,7 @@
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
- CustomLog "logs/access_log" common
+ CustomLog "logs/default/access_apache.log" combined
#
# If you prefer a logfile with access, agent, and referer information
@@ -438,7 +439,7 @@
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
+ErrorDocument 404 http://www.mysite.com/missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
@@ -517,4 +518,6 @@
</IfModule>
# Include extra module configuration files
-IncludeOptional /var/www/conf/modules/*.conf
+#IncludeOptional /var/www/conf/modules/*.conf
+
+Include /etc/apache2/sites-enabled/mysite/mysite.conf
# dmesg
OpenBSD 6.0-beta (GENERIC.MP) #2198: Sun Jun 19 11:58:45 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17135230976 (16341MB)
avail mem = 16611397632 (15841MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb4c0 (54 entries)
bios0: vendor American Megatrends Inc. version "2.00" date 05/08/2012
bios0: Supermicro X9SCD
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG PRAD HPET SSDT SPMI SSDT SSDT DMAR
acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) P0P1(S4) USB1(S4)
USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) USB7(S4) PXSX(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.93 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.30 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.30 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.30 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.30 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.30 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.30 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz, 3392.30 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P1)
acpiprt2 at acpi0: bus -1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C3(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F03" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
"IPI0001" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3401, 3400, 3300, 3100, 3000,
2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v2 Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82580" rev 0x01: msi, address
00:25:90:6a:c8:90
em1 at pci1 dev 0 function 1 "Intel 82580" rev 0x01: msi, address
00:25:90:6a:c8:91
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
vendor "Intel", unknown product 0x1c3b (class communications subclass
miscellaneous, rev 0x04) at pci0 dev 22 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci2 at ppb1 bus 2
vga1 at pci2 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C204 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1003FBYX-0, 01.0> SCSI3
0/direct fixed naa.50014ee20736de8c
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic
2 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: se97
sdtemp1 at iic0 addr 0x1b: se97
lm1 at iic0 addr 0x2c: W83627DHG
spdmem0 at iic0 addr 0x51: 8GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x53: 8GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm2 at wbsio0 port 0xa30/8: NCT6776F
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 1 configuration 1 interface 0 "Ours Technology
product 0x2222" rev 2.00/2.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <IPMI, Virtual Disk, 3000> SCSI0 0/direct
removable
umass1 at uhub2 port 1 configuration 1 interface 1 "Ours Technology
product 0x2222" rev 2.00/2.00 addr 3
umass1: using ATAPI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
cd0 at scsibus3 targ 1 lun 0: <IPMI, Virtual CDROM, YS0J> ATAPI 5/cdrom
removable
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Winbond Electronics
Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Winbond Electronics
Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (46c61511629c7bbd.a) swap on sd0b dump on sd0b
ichiic0: abort failed, status 0x41<BUSY,INUSE>
