>> > On Sat, Jan 22, 2022 at 05:56:31PM -0500, Joe Acquisto-j4 wrote: > >> >> > noauth unix - - n - - smtp >> >> > -o smtp_sasl_enable=no >> >> > -o smtp_sender_dependent_authentication=no >> >> > -o smtp_sasl_password_maps= >> >> >> >> My initial attempts did not produce the desired result. Do I need to >> >> set all three options or just the first? >> > >> > Any one of the three is logically sufficient, but the smtp(8) delivery >> > agent will be unhappy with SASL enabled and no password map, so the last >> > alone won't work. >> > >> >> When I use all three log show invalid comment for smtp >> > >> > You need to as quickly as possible get out of the habit of >> > non-substantive problem reports. If you post no logs and/or >> > no associated configuration data (postconf -nf/postconf -Mf) >> > it didn't happen, and nobody can help you. >> >> Apologies. While I am remiss in not posting that particular error, I >> did post the configuration you mention back on 1/18/2022 1:27:39 PM >> in this same thread. I assumed you had seen them. Easy enough to >> miss from that far back. >> >> The error I mentioned happened when I attempted to set all three options > above >> with all three options set as shown. It is pasted here: >> >> Jan 22 17:07:18 aux postfix/smtp[32115]: fatal: specify a password table via > the `smtp_sasl_password_maps' configuration parameter > > That's because I typo'd the first parameter name, always check > postconf(5) and look at warnings, ... The right setting is: > > -o smtp_sasl_auth_enable=no
And, just like that . . . the problem seems resolved. "To Grok inf fullness" may still be far off, but, we have learned . . . >> I can generate new config dumps if you like, or reference the previous >> ones, which except for the changes above are IIRC virtually unchanged. > > Yes, whenever you change your settings and observe a new issue, post the > new settings. > > -- > Viktor. I presume no logs will be needed at this point. Thanks. To all. joe a. --------------------------------- j4computers, llc Stone Ridge, NY 12484 845-687-3734 www.j4computers.com ---------------------------------