Andrew, These settings in 1.4 are picked up from the PostgreSQL PGXS. My guess is you did not compile your own PostgreSQL 8.4 so maybe those settings are the defaults for who ever is distributing the binary you have.
This link might help http://www.postgis.org/pipermail/postgis-users/2009-September/024439.html Hope that helps, Regina -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andrew Smith Sent: Thursday, September 24, 2009 2:43 AM To: [email protected] Subject: [postgis-users] PostGIS 1.4.0 make problems on Solaris 10 Hi all, Let me preface this email by stating that while I have a basic working knowledge of Solaris, I had never tried compiling an application on that platform before today. My knowledge of makefiles and the make process is essentially zero. That being said, here is my problem. I've been asked to install PostGIS onto a Solaris 10 machine. In order to do that, I first installed PostgreSQL 8.4.1, then PROJ.4 (4.6.1), then GEOS (3.1.1). All of those were quite easy and gave me no trouble whatsoever. Next, I tried to install PostGIS. According to the documentation on the PostGIS website, this should be as straightfoward as: ./configure make make install Whilst the configure works, the make fails dismally. In a nutshell, here's the problem: <snip> gmake -C postgis gmake[1]: Entering directory `/tmp/postgis-1.4.0/postgis' /net/grok/ontools/onnv-tools/SUNWspro/SS11/bin/cc -Xa -E -traditional-cpp postgis.sql.in.c | grep -v '^#' > postgis.sql.in /bin/sh: /net/grok/ontools/onnv-tools/SUNWspro/SS11/bin/cc: not found >From what I have been able to understand, there are a couple of .sql.in files that need to go through the C pre-processor during the make process. The makefile has this to say: # Generate any .sql.in files from .sql.in.c files by running them through the C pre-processor $(SQL_OBJS): %.in: %.in.c $(CPP) -traditional-cpp $< | grep -v '^#' > $@ Somehow, $(CPP) is being set to /net/grok/ontools/onnv-tools/SUNWspro/SS11/bin/cc, which doesn't exist on my system. In fact, I haven't been able to find anything about this mysterious cc process at all. So, my main question is: How does $(CPP) get set? Is there supposed to be a $CPP environment variable defined in the shell before I run the gmake command? I'm assuming it's an environmental problem rather than an issue with the source but have no idea how to proceed. Any suggestions? I've included the full output from configure and gmake below. Cheers, Andrew r...@server4 # su postgres r...@server4 # gunzip < postgis-1.4.0.tar.gz | tar xpf - r...@server4 # cd postgis-1.4.0 r...@server4 # export LD_LIBRARY_PATH=/usr/local/lib r...@server4 #./configure checking build system type... sparc-sun-solaris2.10 checking host system type... sparc-sun-solaris2.10 checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/sfw/bin/ggrep checking for egrep... /usr/sfw/bin/ggrep -E checking for fgrep... /usr/sfw/bin/ggrep -F checking for ld used by gcc... /usr/ccs/bin/ld checking if the linker (/usr/ccs/bin/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... /usr/ccs/bin/nm -p checking the name lister (/usr/ccs/bin/nm -p) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 786240 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking for /usr/ccs/bin/ld option to reload object files... -r checking for objdump... no checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/ccs/bin/nm -p output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/ccs/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... solaris2.10 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking how to run the C preprocessor... gcc -E checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/ccs/bin/ld checking if the linker (/usr/ccs/bin/ld) is GNU ld... no checking whether the g++ linker (/usr/ccs/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... no checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/ccs/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... solaris2.10 ld.so checking how to hardcode library paths into programs... immediate checking if g++ supports -Wall... yes checking if g++ supports -Wmissing-prototypes... yes checking for flex... flex checking lex output file root... lex.yy checking lex library... -lfl checking whether yytext is a pointer... yes checking for bison... bison -y checking ieeefp.h usability... yes checking ieeefp.h presence... yes checking for ieeefp.h... yes checking for convert... /usr/sfw/bin/convert checking for xsltproc... /usr/bin/xsltproc checking for dblatex... no configure: WARNING: dblatex is not installed so PDF documentation cannot be built checking CUnit/CUnit.h usability... no checking CUnit/CUnit.h presence... no checking for CUnit/CUnit.h... no configure: WARNING: could not locate CUnit required for liblwgeom unit tests checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking for libiconv_open in -liconv... yes checking for pg_config... /usr/postgres/8.4-community/bin/pg_config checking libpq-fe.h usability... yes checking libpq-fe.h presence... yes checking for libpq-fe.h... yes checking for PQserverVersion in -lpq... yes checking for geos-config... /usr/local/bin/geos-config checking geos_c.h usability... yes checking geos_c.h presence... yes checking for geos_c.h... yes checking for initGEOS in -lgeos_c... yes checking proj_api.h usability... yes checking proj_api.h presence... yes checking for proj_api.h... yes checking for pj_get_release in -lproj... yes configure: creating ./config.status config.status: creating liblwgeom/Makefile config.status: creating liblwgeom/cunit/Makefile config.status: creating postgis/Makefile config.status: creating postgis/sqldefines.h config.status: creating loader/Makefile config.status: creating topology/Makefile config.status: creating regress/Makefile config.status: creating doc/Makefile config.status: creating doc/html/image_src/Makefile config.status: creating postgis_config.h config.status: executing libtool commands PostGIS is now configured for sparc-sun-solaris2.10 -------------- Compiler Info ------------- C compiler: gcc -g -O2 C++ compiler: g++ -g -O2 -------------- Dependencies -------------- GEOS config: /usr/local/bin/geos-config GEOS version: 3.1 PostgreSQL config: /usr/postgres/8.4-community/bin/pg_config PostgreSQL version: 8.4 PROJ4 version: 46 PostGIS debug level: 0 -------- Documentation Generation -------- xsltproc: /usr/bin/xsltproc xsl style sheets: /usr/share/sgml/docbook/xsl-stylesheets dblatex: convert: /usr/sfw/bin/convert r...@server4 # gmake gmake -C liblwgeom gmake[1]: Entering directory `/tmp/postgis-1.4.0/liblwgeom' gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o measures.o measures.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o box2d.o box2d.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o ptarray.o ptarray.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwgeom_api.o lwgeom_api.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwgeom.o lwgeom.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwpoint.o lwpoint.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwline.o lwline.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwpoly.o lwpoly.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwmpoint.o lwmpoint.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwmline.o lwmline.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwmpoly.o lwmpoly.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwcollection.o lwcollection.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwcircstring.o lwcircstring.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwcompound.o lwcompound.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwcurvepoly.o lwcurvepoly.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwmcurve.o lwmcurve.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwmsurface.o lwmsurface.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwutil.o lwutil.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwalgorithm.o lwalgorithm.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwgunparse.o lwgunparse.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwgparse.o lwgparse.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lwsegmentize.o lwsegmentize.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o wktparse.tab.o wktparse.tab.c gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o lex.yy.o lex.yy.c lex.yy.c:4127: warning: 'yyunput' defined but not used gcc -g -O2 -fPIC -DPIC -Wall -Wmissing-prototypes -c -o vsprintf.o vsprintf.c ar rs liblwgeom.a measures.o box2d.o ptarray.o lwgeom_api.o lwgeom.o lwpoint.o lwline.o lwpoly.o lwmpoint.o lwmline.o lwmpoly.o lwcollection.o lwcircstring.o lwcompound.o lwcurvepoly.o lwmcurve.o lwmsurface.o lwutil.o lwalgorithm.o lwgunparse.o lwgparse.o lwsegmentize.o wktparse.tab.o lex.yy.o vsprintf.o ar: creating liblwgeom.a gmake[1]: Leaving directory `/tmp/postgis-1.4.0/liblwgeom' gmake -C postgis gmake[1]: Entering directory `/tmp/postgis-1.4.0/postgis' /net/grok/ontools/onnv-tools/SUNWspro/SS11/bin/cc -Xa -E -traditional-cpp postgis.sql.in.c | grep -v '^#' > postgis.sql.in /bin/sh: /net/grok/ontools/onnv-tools/SUNWspro/SS11/bin/cc: not found gmake[1]: *** [postgis.sql.in] Error 1 gmake[1]: *** Deleting file `postgis.sql.in' gmake[1]: Leaving directory `/tmp/postgis-1.4.0/postgis' gmake: *** [postgis] Error 2 _______________________________________________ postgis-users mailing list [email protected] http://postgis.refractions.net/mailman/listinfo/postgis-users _______________________________________________ postgis-users mailing list [email protected] http://postgis.refractions.net/mailman/listinfo/postgis-users
