Hi Anne,
The correct parameter for BackEnd timeouts is the "TimeOut" parameter. Here is
a documentation snippet, you can find this by running "man pound" from your
shell.
Alive value
Specify how often Pound will check for resurected back-end hosts
(default: 30 seconds). In general,
it is a good idea to set this as low as possible - it will find
resurected hosts faster. However,
if you set it too low it will consume resources - so beware.
Client value
Specify for how long Pound will wait for a client request
(default: 10 seconds). After this long
has passed without the client sending any data Pound will close
the connection. Set it higher if
your clients time-out on a slow network or over-loaded
server, lower if you start getting DOS
attacks or run into problems with IE clients. This value can be
overridden for specific listeners.
TimeOut value
How long should Pound wait for a response from the back-end
(in seconds). Default: 15 seconds.
This value can be overridden for specific back-ends.
ConnTO value
How long should Pound wait for a connection to the back-end (in
seconds). Default: the TimeOut
value. This value can be overridden for specific back-ends.
- Chris
-----Original Message-----
From: Anne Moore [mailto:[email protected]]
Sent: Wednesday, April 07, 2010 8:05 PM
To: [email protected]
Subject: [Pound Mailing List] database queries not working
Hi All
Whenever I do any type of heavy (data) database query from my client through
the pound SSL server, it returns an error message. As of now, that's the
only thing stopping our company from putting the pound LB in production.
(NOTE* small database queries work fine through the LB pound.)
I get this error message on the client: "An internal server error occurred.
Please try again later."
On the POUND server log, I get this error message: "pound: (b7e21ba0) e500
response error read from 172.29.4.12:7777/GET /mkrrro/listMyLoadList.do
HTTP/1.1: Connection timed out (14.999 secs):"
In my pound config, I increased my timeout "CLIENT" to 120 seconds. I also
increased my "ALIVE" to 120 seconds. Still, not working. (If I remove the
pound SSL in front, the heavy (data) database queries work fine on the
servers.)
The Apache server on the backend web servers are set to 300 seconds.
Again, this only happens when using pound.
Any of you have ideas on how I can get pound to work with these heavy
database queries?
Thank you!
Anne
--
To unsubscribe send an email with subject unsubscribe to [email protected].
Please contact [email protected] for questions.
________________________________
This e-mail message, including any attachments, from Verrus Mobile Technologies
Inc. or Verrus UK Limited (collectively, "Verrus") is confidential and for the
personal use of the recipient(s) identified above. This message may also be
legally privileged. If it is not intended for you, do not disclose, copy or
distribute the message but delete it immediately and notify the sender by
e-mail or telephone +1 866 783 7787 or +44 1453 760000 (UK).
Any views or opinions expressed in this message are those of the author and not
necessarily those of Verrus. The message shall not form part of any legally
binding contract or obligation.
Verrus electronic communication systems are monitored without user consent to:
investigate or to detect unauthorized use; prevent or detect crime; establish
the existence of facts relevant to Verrus; or ascertain compliance with
regulatory practices relevant to the business of Verrus.
This e-mail has been scanned for viruses by a third party e-mail management
provider. Verrus cannot accept liability for any damage which you may suffer as
a result of virus infection. We recommend that you carry out your own virus
checks before opening any attachment.
--
To unsubscribe send an email with subject unsubscribe to [email protected].
Please contact [email protected] for questions.
