Hi List.
I have installed pound and enabled poundctl through the Control parameter.
I have 3 listeners, one service per listener and 2 back end per service. I
am trying to experiment with enabling/disabling back ends. I'm trying to
disabled the first back end on the first service of the second listener. I
issue this command to disable worker 1:
poundctl -c /tmp/pound.sock -b 1 0 0
The command executes without problems. But when I subsequently run poundctl
without any parameters, I see this, which seems to indicate that both back
ends are still active:
poundctl -c /tmp/pound.sock
0. http Listener 10.161.101.70:80 a
0. Service active (1)
0. Backend (UNKNOWN):0 active (1 0.000 sec) alive
1. HTTPS Listener 10.161.101.70:443 a
0. Service active (10)
0. Backend 10.161.101.68:8970 active (5 0.000 sec) alive
1. Backend 10.161.101.67:8970 active (5 0.000 sec) alive
0. Session DDA4A63B600E6E30792AAE848CDDF89A.qa2 -> 1
1. Session 095BAD981702A0CF5FBA22EB9F96BF9A.qa1 -> 0
2. Session 3B0339E4E14F739CCC3DEF255A6F522C.qa1 -> 0
3. Session E59435212623CF980841DA3D6343CAC1.qa2 -> 1
4. Session 8B990F1C18EF77C450D7BB3162D1C83C.qa2 -> 1
2. http Listener 10.161.101.69:80 a
0. Service active (10)
0. Backend 10.161.101.68:8970 active (5 0.000 sec) alive
1. Backend 10.161.101.67:8970 active (5 0.000 sec) alive
-1. Global services
What am I missing? Thanks.
Rob
