I think that rewritelocation 2 will do the trick... but i dont have an environment to test.
Em 17/05/2012, às 19:42, Roberto Pimenta Jr. <[email protected]> escreveu: > have you tested with rewrite location or rewrite destination? > > > > Em 17/05/2012, às 19:01, Leo Cadle <[email protected]> escreveu: > >> Hi List, >> >> >> >> I will reply once here to all comments. >> >> >> >> I have removed HA Proxy, it was just doing the Load Balancing while Pound >> was doing the SSL Offload. >> >> I had not tried to setup an environment like this before and was following a >> tutorial that did it this way. Once I installed Pound I could see it could >> do the same thing on the back end but did not remove HA Proxy straight away. >> It is now out of the picture. >> >> I am trying to replicate our production environment in a test scenario. Our >> production environment uses hardware load balancers, I am trying to see if I >> can replicate the configuration using software Load Balancers so we can >> better test our releases. So far I have tried Microsoft ARR, which has a >> checkbox to enable or disable this particular behaviour called ‘Reverse >> rewrite host header’. >> >> The backend web server is a singe server with one IP address, it hosts >> multiple sites answering to different subdomains. That is why we have the >> wildcard certificate. The DNS is set correctly with all sudomains pointing >> to the same IP. Without Pound the redirect works correctly, when pound is >> involved the subdomain always gets rewritten to the starting subdomain. It >> is not a problem with our redirect code, it is a simple redirect, this is a >> replica of our production code which works correctly behind Brocade Load >> Balancers (http://www.brocade.com/index.page) and also works behind >> Microsoft ARR (something else is the problem with ARR). >> >> I have included a tcp dump that shows the rewrite taking place. >> >> >> >> Cheers, >> >> Leo. >> >> On Fri, May 18, 2012 at 4:39 AM, Roberto Geraldo Pimenta Ribeiro Junior >> <[email protected]> wrote: >> >> -Are you using nginx or apache? >> >> -Could you send us your redirect code in the php file? >> >> -Why are you using pound AND haproxy? >> >> >> >> Regards, >> >> Roberto >> >> >> >> De: Roberto Geraldo Pimenta Ribeiro Junior >> Enviada em: quinta-feira, 17 de maio de 2012 15:36 >> Para: [email protected] >> Assunto: RES: [Pound Mailing List] Wildcard Certificate and 302 redirect >> >> >> >> I completely agree. It does not seem a pound matter….. >> >> >> >> De: Jacob Anderson [mailto:[email protected]] >> >> Enviada em: quinta-feira, 17 de maio de 2012 12:20 >> Para: [email protected] >> >> Assunto: RE: [Pound Mailing List] Wildcard Certificate and 302 redirect >> >> >> >> Hello, >> >> >> >> For my take, and my experience only, I’ve had this occur when I did not have >> the DNS setup properly. In my case, I was not setting the sd1.example.com >> and sd2.example.com domains back to the local IP addresses. When this was >> the case, pound would not redirect correctly and our login would never work. >> Once I added the local IP name service for example.com, pound started to >> redirect properly. Our backends were tomcat servers. >> >> >> >> Just my experience, and it may not reflect what you are experiencing. Pound >> is very touchy about DNS from what I’ve seen. >> >> >> >> -- Jake >> >> >> >> >> >> From: Andrzej Dopierała [mailto:[email protected]] >> Sent: Thursday, May 17, 2012 6:43 AM >> To: [email protected] >> Subject: Re: [Pound Mailing List] Wildcard Certificate and 302 redirect >> >> >> >> W dniu 17.05.2012 04:16, Leo Cadle pisze: >> >> Hi List, >> >> >> >> I am having trouble with Pound in front of HAProxy, they are performing SSL >> Offload and Load Balancing in front of a Web Server with multiple sites in >> the same domain. Everything works apart from one niggling problem, when I do >> a 302 redirect from one subdomain site to another on the webserver it does >> not change the subdomain sent to the client. E.g. >> https://sd1.example.com/test.php performs a 302 redirect to >> https://sd2.example.com/result.php but instead the client is redirected to >> https://sd1.example.com/result.php I have included my config below. I have >> read the man pages, the mailing list and scoured google but I cannot seem to >> find the same issue explained in a way I can make sense of. This is my first >> time using Pound and HAProxy (I have sent the same question to the HAProxy >> list) I am not sure where this is going wrong but have searched resolutions >> in both software. >> >> >> >> use >> "RewriteLocation 0" in Listeners. >> >> # poundctl control socket >> >> Control "/var/run/pound/poundctl.socket" >> >> >> >> >> >> ###################################################################### >> >> ## listen, redirect and ... to: >> >> >> >> ## redirect all requests on port 8080 ("ListenHTTP") to the local webserver >> (see "Service" below): >> >> ListenHTTP >> >> Address 127.0.0.1 >> >> Port 8080 >> >> Client 10 >> >> ## allow PUT and DELETE also (by default only GET, POST and HEAD)?: >> >> # xHTTP 0 >> >> >> >> Service >> >> BackEnd >> >> Address 127.0.0.1 >> >> Port 80 >> >> End >> >> End >> >> End >> >> >> >> ListenHTTPS >> >> Address 192.168.1.80 >> >> Port 443 >> >> Cert "/etc/pound/star.staging.poli.local.pem" >> >> Client 20 >> >> Service >> >> BackEnd >> >> Address 127.0.0.2 >> >> Port 80 >> >> End >> >> End >> >> End >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> [ Wrote 60 lines ] >> >> ^G Get Help ^O WriteOut ^R Read File >> ^Y Prev Page ^K Cut Text ^C Cur >> Pos >> >> ^X Exit ^J Justify ^W Where Is >> ^V Next Page ^U UnCut Text ^T To >> Spell >> >> >> >> Regards, >> >> Leo Cadle >> >> >> >> Network/System Administrator >> >> POLi Payments >> >> >> >> Phone Numbers >> >> Direct: +61 3 8601 5907 >> >> Main: +61 3 8601 5900 >> >> Free: 1300 007654 >> >> Fax: +61 3 8601 5999 >> >> >> >> URL: http://www.polipayments.com >> >> >> >> ____________________________________________________________________________ >> >> This e-mail and any attachments to it (the "Communication") are, unless >> otherwise stated, confidential. It may contain copyright material and is for >> the use only of the intended recipient. If you have received the >> Communication in error, please notify the sender immediately by return >> e-mail, then delete the Communication and the return e-mail. Please do not >> read, copy, retransmit or otherwise deal with it. Any views expressed in the >> Communication are those of the individual sender only, unless expressly >> stated to be those of Centricom Pty Ltd (ABN73 105 393 664). Centricom does >> not accept liability in connection with the integrity of (or errors) in the >> Communication, computer virus, data corruption, interference or delay >> arising from or in respect of the Communication. >> >> >> >> >> >> -- >> Regards, >> Andrzej 'The Undefined' Dopierała >> http://andrzej.dopierala.name/ >> >> >> >> -- >> >> >> >> Regards, >> >> >> >> Leo Cadle >> >> Network/System Administrator >> >> POLi Payments >> >> >> >> Phone Numbers >> >> Direct: +61 3 8601 5907 >> >> Main: +61 3 8601 5900 >> >> Fax: +61 3 8601 5999 >> >> >> >> URL: http://www.polipayments.com >> >> ____________________________________________________________________________ >> >> >> >> This e-mail and any attachments to it (the "Communication") are, unless >> otherwise stated, confidential. It may contain copyright material and is for >> the use only of the intended recipient. If you have received the >> Communication in error, please notify the sender immediately by return >> e-mail, then delete the Communication and the return e-mail. Please do not >> read, copy, retransmit or otherwise deal with it. Any views expressed in the >> Communication are those of the individual sender only, unless expressly >> stated to be those of Centricom Pty Ltd (ABN73 105 393 664). Centricom does >> not accept liability in connection with the integrity of (or errors) in the >> Communication, computer virus, data corruption, interference or delay >> arising from or in respect of the Communication. >> >> >> >> <redir.cap>
