--- In [email protected], "brucexs" <[EMAIL PROTECTED]> wrote: > > Note: While investigating this situation, I found a bug in code > which centers icons on button. Please download revised beta 4.3.10c > for a fix. > > > http://powerpro.webeddie.com/download/ppro4310.zip > > > > (it probably wouldn't be > > so > > > bad, but I've found that when you drag it to 0 height, there is > no > > > easy way to restore your bar). > > Allowing 1 pixel height for these types of bars was an unintended > side effect of a change I made in the past to allow small bar > sizes. > > A quick way to fix is to define a hot key with the command > win.size("yourbarname",100,50) > > Another way to fix is to open pproconf, change bar position to > floating, check bar size from sum of buttons, press apply, uncheck > bar size from sume of buttons, drag bar height to desired, press OK, > then ctrl-right click on bar and reset position to top (full screen). > > > > > > > > Anyway, > > > is there some sort of trick to making this Button Height option > > > actually do something? > > For bars with the (full screen) edge positions (and floating bars), > and for these bar positions only, the dimensions set by dragging the > 3d edges overrule the button heights. > > So in your case, one solution would be to set the button height to > say 52 (for a little margin on the bar icon height of 48) then close > configuration, then drag bar height to desired look using 3d edge, > then ctrl-right click on bar and uncheck 3d sizing from "look" > submenu. > > > A totally different solution would be to keep the 3d look but use > the top edge (current size) position, since for this position the 3d > edge is not draggable. To follow this solution, set the bar > position to floating and drag the edges to desired dimensions (full > screen across, desired height). Then set position to top edge, > current size). > Hi brucexs,
I downloaded the 4.3.10c (and also the 4.4 RC1 which it seems is exactly the same as 4.3.10c), which I then installed (the 4.4 I mean). Was the icon fix that you put in (although one of your other messages says that you decided to take the fix out after all?) meant to fix the icons not being centred? It hasn't for me - they are still cut off, though your other messsge about removing the fix suggests that this is how it is meant to behave. I will also try out your other suggestions and post back how they went. CM ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/JV_rlB/TM --------------------------------------------------------------------~-> Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
