Hi everyone, I'm just experimenting with some different bar types. Currently I have a 'top edge, full screen' bar, set to hide after 50ms and set to show when bump nearest edge. Now, what I was looking to do was to keep this configuration, but to increase the size of my icons. I went into the bar properties and changed the size from 48x48 to 64x64. Now, 64 is big enough, but I have so many icons on my bar, they go off the right hand side of the screen. I thought about removing a number of buttons, but I'm used to my config, and don't want to change it.
So, I started experimenting wih multi-line bars. It wasn't described in the Help as to how to do it, but I managed to work out how to make a multi-line bar eventually. Now, all I need to do is to get the config right, and this is where I need some help. I left my bar at 'top edge, full screen' - but it was only showing the first row of icons. So, I ticked the 3d frame option and dragged the bar to show the second line. However, once I Ok'ed the change, the bar went back to only showing the first line. So, I figured that this must mean that you can't size a 'full screen' bar (unless I am missing something). I further experimented with a floating bar, and could easily make it keep it's size, but the 'hidden until bumping' I couldn't get to work. Anyway, is there a way in PowerPro to do the config that I put in the subject line? Leaving the bar as top edge, full size would be great, if it is possible to get PowerPro to resize it to show both lines of the bar, and keep it that way. -- Regards, CM Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
