I have a floating bar that is set to: Show if bump: Bottom Edge Bump must be within bar Hide After: 500 ms
The bar is positioned just above the regular Windows taskbar. Lately I have noticed that the bar is not hiding a lot of the time. Here's what I think is happening: If I bump the bottom edge and the bar shows but then my cursor does not pass over the bar, the bar does not auto hide. I can force this by bumping the bottom edge and then moving my cursor off to the side so it doesn't touch the bar. The bar never hides. If I bump the bottom edge to show the bar and then move my cursor so it passes over the bar, then it hides as it should. I never used to notice this until I got a new PC a few weeks ago. When I installed PPro on the new PC I updated to the current version, which was 4.4. I think I was using 4.2 prior to that. So this behavior must have been introduced sometime between those versions. Either that or it is something about my new PC. I must do a lot of bumps by accident because this bar is in my way all the time now. I'm increasing the bump time to see if it helps, but I was wondering if this was an intentional change? Sue [Non-text portions of this message have been removed] Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
