--- In [email protected], "jjphoogrp" <[EMAIL PROTECTED]> wrote: > > Clicking on "Apply" or "OK" on the Command Lists tab causes PowerPro > to exit. Then a Windows XP error box appears, saying that Explorer has > exited because it can't read a particular memory location. > > I can't restart PowerPro except by rebooting. > > I looked into the Windows "Data Execution Prevention" facility, but > this does not seem to be the problem. >
Something in your config seems to be activating a bug, although it is strange this does not happen when PowerPro starts. First, ensure you are using at least version 4.4. If this is not it, try the following. Shtudown PowerPro, run pproconf.exe alone by drag-dropping pproconf.pcf onto pproconf.exe (using explorer on c:\program files\powerpro). Try the following changes, each separately, and after each one try starting and reconfiguring PowerPro to see if it fixes. 1. Change position of all bars which are positioned in the taskbar to floating. Make sure you check for more than one bar having this position. 2. Ensure setup|advanced|other "restore icons when desktop resolution changes" is unchecked 3. Uncheck Setup|advanced|Configure "Run reconfigure command list with each new configuration" 4. Change command lists\setup|special list|monitor list to none. Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
