At 01:56 PM 4/12/2006 +1000, Alan Martin wrote:

>Hello Tom,
>
>This worked when I tested it here.
>For your scheduled item's main command:
>
>oldwin=win.handle("active")
>
>Paste into the More commands box:
>
>*Message your text here
>;; wait.for(100)
>*Window Ontop! PowerPro Message
>*Window Show! oldwin
>
>Note: when tested here, the wait.for(msecs) was not needed;
>you can leave it out.
>I added it just in case you have a problem with timing
>on your machine - if so experiment to find the smallest wait
>to make it work.

Thanks, Alan!

I happened upon another solution which so far seems to be working.

In Powerpro config, on the Setup tab:
Cursor to button except
=powerpro

Seems to prevent the alarm window from grabbing focus when it pops up 
(stayontop).

At first I thought my only solution would be to turn off the Logitech 
mouse's "smart move" option, but as that proved to be a global 
effect, I quickly decided I didn't like it. That's when I hit upon 
the Powerpro config option.

I use a lot of alarms, so your solution might prove a bit cumbersome 
for writing alarms "on the fly" which I quite often do - unless 
perhaps it could be turned into a subroutine that could be called 
from each alarm I create.

I'm glad you responded, though. I thought the silence that greeted my 
message at first meant I was supposed to RTFM :-)


Tom 



Attention: PowerPro's Web site has moved: http://www.ppro.org 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/power-pro/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to