Hi, My notebook (Fujitsu/Siemens Celsius H230) has two Batteries. The internal Batterie has 14.4V, 4.8 Ah. The secondary Batterie (in the CD-Bay) has 10.8V and 3.8 Ah. This seems to be handled OK, since your software only gets the "watts".
But: Where do you get the value of "watts_left"? The ACPI batterie-info file doesnt show a remaining capacity in mW, only present rate (in mA), remaining capacity (in mAh) and present voltage (in mV). Martin
==> CMB1/state <== present: yes capacity state: ok charging state: discharging present rate: 1748 mA remaining capacity: 4800 mAh present voltage: 15981 mV ==> CMB2/state <== present: yes capacity state: critical charging state: discharging present rate: 0 mA remaining capacity: 0 mAh present voltage: 0 mV
_______________________________________________ Power mailing list [email protected] http://www.bughost.org/mailman/listinfo/power
