I was wondering if this is O.K. for IO-APIC, under dmesg I see:
[ 23.440498] ENABLING IO-APIC IRQs
[ 23.440499] init IO_APIC IRQs
[ 23.440501] IO-APIC (apicid-pin) 1-0 not connected.
[ 23.440545] IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21,
1-22, 1-23 not connected.
[ 23.440697] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 23.540628] Using local APIC timer interrupts.
[ 23.540629] calibrating APIC timer ...
[ 23.659339] ... lapic delta = 1039057
[ 23.659340] ... PM timer delta = 357953
[ 23.659341] ... PM timer result ok
[ 23.659343] ..... delta 1039057
[ 23.659344] ..... mult: 44627158
[ 23.659345] ..... calibration result: 1662491
[ 23.659347] ..... CPU clock speed is 2161.2403 MHz.
[ 23.659349] ..... host bus clock speed is 166.2491 MHz.
[ 23.659452] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
should I be concerned with IO-APIC (apicid-pin)saying not connected?
Justin P. Mattock
_______________________________________________
Power mailing list
[email protected]
http://www.bughost.org/mailman/listinfo/power
