Felipe Sateler wrote: > Ping?
it's still in the queue, I've been looking at other stuff and will queue up some other stuff to batch-process them :) Auke > > El 19/06/08 00:01 Felipe Sateler escribió: >> El 18/06/08 23:55 Kok, Auke escribió: >>> Felipe Sateler wrote: >>>> I see that powertop 1.10 reads the sysfs interface to acpi. Great. >>>> However, I think that the reading is currently broken, for the >>>> following reasons: >>>> >>>> 1. It reads /sys/class/power_supply/<device>/energy_now which (at least >>>> on my debian box) doesn't exist. I think it should read charge_now. >>>> 2. It reads current_now as watts_drawn, I think it should be >>>> amperes_drawn >>>> >>>> It also appears that the units are not correctly calculated too. >>> ok. feel free to take a stab at making a patch and post it here. I'll be >>> offline for a week but certainly will look into this next week when I get >>> back. >> OK, I took a shot at fixing this. The problem is that there are several >> charge sources available from sysfs, depending on the capabilities of the >> battery. In my case, the battery wasn't providing the energy_now attribute >> which tells the amount of µWh left, but I have charge_now which has the µAh >> left. Thus, I changed powertop.c to read both, and use energy_now if >> available, and use charge_now*voltage otherwise (which should be a >> reasonable approximation). >> >> >> Saludos, >> Felipe Sateler > > > > Saludos, > Felipe Sateler _______________________________________________ Power mailing list [email protected] http://www.bughost.org/mailman/listinfo/power
