> it picks the top 5 in terms of usage, but if you have less than 5 active > it picks fills the 0's from the bottom.
Did the screen shot on my original email make it through? It showed 200 (97.7%), 400 (1.0%), 1100 (0.0%), 1300 (0.0%), and 1500 (1.3%), though based on your explanation it should show 200 (97.7%), 400 (1.0%), 600 (0.0%), 900 (0.0%), 1500 (1.3%) on this platform. Are there any reasons why powertop might be showing the wrong pstates? Or is powertop just reading the pstate information that the firmware provides (meaning the firmware did not report the 600 and 900 Mhz frequencies)? Thanks. -Ryan _______________________________________________ Power mailing list [email protected] http://www.bughost.org/mailman/listinfo/power
