I run an entirely 32 bit userspace on a 64bit kernel. I've compiled
suspend-utils from todays git
tree. trying to use s2disk results in the following :
Is this a supported configuration?
brad@bklaptop:~$ sudo s2disk
s2disk: Could not use the resume device (try swapon -a). Reason: Invalid
argument
brad@bklaptop:~$ dmesg | tail -n3
[ 823.530812] video LNXVIDEO:00: Restoring backlight state
[ 834.100071] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra =
00:26:f2:94:ba:59 tid = 0
[ 842.392066] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra =
00:26:f2:94:ba:59 tid = 0
snip of strace
open("resume", O_RDWR|O_LARGEFILE) = 3
stat64("/dev/snapshot", {st_mode=S_IFCHR|0660, st_rdev=makedev(10, 231), ...})
= 0
open("/dev/snapshot", O_RDONLY|O_LARGEFILE) = 4
ioctl(4, 0x400c330d, 0xffe07a3c) = -1 EINVAL (Invalid argument)
ioctl(4, 0x4004330a, 0x805) = -1 EINVAL (Invalid argument)
write(2, "s2disk: Could not use the resume"..., 82s2disk: Could not use the
resume device (try
swapon -a). Reason: Invalid argument
echo mem > /sys/power/state
.. works fine, but no compression, status or encryption.
Regards,
Brad
--
Dolphins are so intelligent that within a few weeks they can
train Americans to stand at the edge of the pool and throw them
fish.
_______________________________________________
Power mailing list
[email protected]
https://bughost.org/mailman/listinfo/power
