At 10:40 PM -0700 5/31/02, rpadv wrote:
>I'm trying to install a 32MB ram chip in a 520 Power Book. The machine has
>only had the factory 4MB installed before. We put in the 32MB and the 520
>will not boot. Boots great without it. We put the 32mb chip in another 520
>that originally had 12MB on it. The 32 works fine in the 2nd machine. Any
>idea what to do to make the one computer recognize the new chip???
One possibility, expecially if another RAM module also fails to
show up in the bad 520, is a bent pin at one end or the other of the RAM
slot on the processor daughtercard. I'd grab a 33/66 Mhz daughtercard and
upgrade the 520 anyway.
Paul
--
PowerBooks is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
