>-- Hi > >Ok i need help from the group of you that strip boards and solder like (mad >dog) if he is listening. > >My problem is the power connector on my 190 the psu is totally shot and i >need to replace it but the cost in the UK is silly so i have an old 150 mb >that is shot (nice big crack) can i take the power connector of this board >and solder it to the 190cs then use the 150 psu to power the 190cs, it does >not have to charge the batterys as my 3400 can do that . > >any ideas > >and help would be gladly accepted. > >Victoria.
Are you sure the connector between the 2 is identical ? If not, dont try it. It is likely (although I dont know for sure) that the voltages required between the 2 different models are different. If you need a replacement, you can probably find a 190 motherboard on ebay for cheap. Mad Dog -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
