> Date: Wed, 12 Feb 2003 17:37:52 -0600 > From: Ronald Romine <[EMAIL PROTECTED]> > Subject: Re: Problematic 1400+ethernet? > > I also use a Dayna CommuniCard Ethernet > Adapter (PCMCIA) with my 1400, however i > found that the newer driver for the card > doesn't work with my 1400. > > If I remember correctly ... > > The drivers installed by CommuniCard > Installer v2.2, (which came on my 8.1 > install CD) works without problems on my > 1400 under 9.1. > > However, the drivers installed by the > CommuniCard Installer v2.3, (downloaded > from the internet) did not work. > > My best guess is that the 2.3 software only > installs version 3.0 of the Card & Socket > Services. The 1400 only supports version 2.0, > (version 3.0 is for 2400, 3400 and later > powerbooks). > > Note that CommuniCard Installer v2.2, allows > the installation of either version 2.0 or 3.0 > of the Card & Socket Services.
There's a good Japanese site with lots-o-drivers for Mac NIC cards (including the one mentioned in the message to which I am replying): http://www.ujmacs.co.jp/support/nic.html Enter the URL in Babelfish to translate: http://www.babelfish.altavista.com Regards, Bob Eye Dallas, TX -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com