I may try that. The last time I did I used the same number that the DHCP would have assigned and it didn't work.
-tom > ---------- > From: jim page > Subject: Re: IP problem on PowerBook 3400 - static IPs > > > might want to try static IPs, not elegant but works for my 5 wired home > networked MACs running 8.6( three 3400's and two G3s) > > i set up my linksys box to start assigning DHCP addresses at IP 100, so i > have addresses under 100 to assign statically > > not elegant, simple, works for me > > jim > > > > > on 10/27/03 12:19 PM, Tom Roth wrote: > > > >> > >> I have a PowerBook 3400 running OS 9.1 at home connected to a Netgear = > >> Wireless (or wired) router which is in turn connected to a cable modem. = > >> Lately, if I have to reboot or if I shutdown when it comes back up it = > >> fails to acquire a TCP/IP number even though it's set to do so. At = > > > > <snip> > >> > >> Anyone have any suggestions? > > > -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
