Here's an odd problem... System: 604/150 in a PowerCurve OS 9.1 192/4gb (10mb RAM DISK) VM on at +1mb On board video w/ 2mb VRAM Apple Multiple Scan 17 monitor Set white ballance to 9300K and it runs fine for about 5 minutes then the monitor switches to a D65 white balance (much more yellow/gray) CP is still set at 9300K and opening it and starting the calibration dialog sets the balance back where it should be. I've tried 3 different identical monitors and have had the same problem... Suspected overheating so just opened it up and blew out the dust bunnies. Reseated all cards while there. No change. Anyone ever experienced this? Anyone found the cure? Is the onboard dying? Is it V-card time? Next step is to try the other (PC) port and the cheap, ugly, deep Apple 17... Uck! TIA Jim -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Save on Mac software -- Shop Software Outlet.com <http://lowendmac.com/ad/software.outlet.html> Star Trek Collection: Movies 1-7 on VideoCD, $38.88 from CoolVCD <http://lowendmac.com/ad/coolvcd.html> - - - - - Power Computing list info: <http://lowendmac.com/power/list.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
