In my recently aquired PTP I have been having a problem that has existed through several modifications, but I'm still a bit lost. I'm not done trouble shooting (still need to look at the possibility of SCSI voodoo with a now unhooked drive), but I'm asking to see if there is anything specific with clones that I'm just not used to. This machine will not warm reboot. I always have to to a forced power-down (not good for the finder or system software) and, I can't get it to fire up consistently form another hard-drive (command-option-shift-delete) or use the C-key to start from a CD without choosing either from the start-up disk control panel. The 3 gig drive that was in it has 8.6 on it with LaCie utilities and FWB on a separate partition, and runs fine (after the aforementioned process), and 9 gig I put in has 9.1 (slower than 8.6 on a 604e, but stable). I put a gig 'o ram in it, and 2 PCI cards (2nd monitor and an Adaptec 2930) and it recognizes all the drives hooked up. When I get it to run, it runs great, but these shutdowns are slowly taking a toll on the system folders on both hard-drives. What am I missing?
Thanks, Greg -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
