Robert wrote: >thanks for your help ... I may have found the problem ... on the outside of >the box it says that it will work with ANY PC but on the inside it says G3 >266 or better. So i Guess I'll be returning it :-)
That may be, but if you're running a recent OS such 8.6 or 9.1 you should still be OK, not that knowing that really helps much since the problem isn't fixed yet. That whole "G3 or better" doesn't make any sense, in my opinion. The idea with that kind of "requirement" is that if you have a newer Mac (the 266 G3) you probably also have some newer software that will work with the card. Shaky presumption. There's something else afoot. The same software that you'd have to add to a beige G3 is the same you'd add to a non-G3 PCI clone. My folks have a Belkin that works great in a 7500/200 running 9.1 and the USB 1.4.1 addition. -David -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
