James wrote: >Been watching all the info going down about the above, and having >similar problems, >but cannot get any video to come up on the monitor. Have checked all >the boards, >and followed all the instructions as I have read on here, but still no >video, even >with several monitors. Any suggestions? Has an external video card too.
A coupla common problems with the PowerCenterPro are 1. A failed cache dimm prevents monitor boot up. Remove this dimm and try to boot up without it. (It's the separate dimm beside the CPU) 2. Also try undoing the hold down for the monitor riser card and reseating it. This card can be jostled slightly loose during a move, and appear fully seated. Reseating it sometimes cures the problem you describe. If it's the PowerBase 210 you have then our core of PowerBase users may have other suggestions. Cheers...Michael -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
