Caution: Do not mix EDO and non-EDO on the same board. This is from (horrible) personal experience.
Hans -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Sunday, January 05, 2003 6:25 PM To: [EMAIL PROTECTED] Subject: RAM specs for mini-tower PowerCenter Pro 240 Fellow Listers, I'm about to finally upgrade the original 1997 64MB of RAM in my mini-tower, PowerCenter Pro 240. From what I've seen it looks like either EDO or non-EDO will work. It also looks like either 3.3 volt or 5 volt will work, with the correct jumper setting. For the $27 that OWC is asking for a 128MB module, it's time to do the upgrade. Has anyone actually changed this jumper? I've yet to look for it, what's involved? How does one know which setting is for 3.3 or 5 volts. I'm loath to smoke check a hundred bucks worth of RAM. All sage advice is welcome, on or off the list. I'm happy to RTFM, but I don't have one. If this works, I'll soon have 64MB of original RAM for the first taker. Thanks, Tom -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
