The proper memory for the PCP (and most of the Power Computing family) is a 168-pin, 5V, 60 ns FPM (that is, a non EDO) DIMM.
I, too, have good luck with the Other World Computing RAM (aka, macsales.com) as referenced by Marc Bouchard. More learned or experienced persons could explain the difference in a DIMM and a SDRAM DIMM. But the consensus is clear that SDRAM won't work. Do a search for SDRAM in the list archive to read previous discussions. -- Chuck on 3/10/03 10:13 PM, TEA at [EMAIL PROTECTED] wrote: > Hi: > > I have a Power Center Pro 180 that was upgraded to a G3. > > It takes 168 pin DIMMS, operating at 60 or 70 nano-seconds, 5.0 Volts ( > I believe). Could I use a "128MB, 168 PIN, PC133, SDRAM DIMM" (i.e. > today's faster ram) in my machine? Would it be 'backwards compatible'? > > If not, additional information would be helpful. > > > Mark H > Toronto > -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
