:( HELP! Power Tower Pro originally a 225 Upgraded with Sonnet G4 800Mz 2 160 ATA Drives on Sonnet Trio Card 2 SCSI drives on original internal SCSI bus
On startup or restart I'm reaching a screen that reads: OPEN FIRMWARE 1.0.5 To continue booting the MacOS type: BYE <return> To continue booting from the default boot drive type: BOOT <return> The problem is my keyboard produces no input, even though I selected it as the input device in XPostFacto. The keyboard connections are fine - It was working up to the moment this happened. This occurred when I was trying to install 10.3 using XPF 3.0a17. I stopped the installation because I could barely read the screen and realized I should have selected the old video drivers in XPF. Up till now everything was working fine. There are two good bootable partitions with 9.2.1 on them. How do I get to them? I've tried disconnecting all the drives but the cd drive, and then booting from the cd drive (a techtool disc with 9.0 on it). Same screen comes up. I was putting the aborted copy of 10.3 on a partition of one of the 160 G drives. One copy of 9.2.1 is on another partition on that same drive. The other copy of 9.2.1 is on one of the SCSI drives. -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
