At 12:21 -0400 2005/08/01, Krow Magnum wrote: >Since it was set for a Mach V board I would assume you are right, the >board has been swapped. But that shouldn't make a difference in the >PTPro as long as the switches are set at 50MHz bus and no more CPU >speed than the card is rated at. > >I would try backing the CPU speed down to 400MHz and see what happens. >Other than trying different settings which you have already done I >don't know what else to tell you.
Can someone point me to info on the switch settings for this model (the G3/500/1M)? Is there a manual somewhere? - Aaron -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:powercomputing@mail.maclaunch.com> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
