Browns Ferry has been successful in this. We use currently TeleView software and I have had 8 running and transmitting in the past.
The setup of the Radnet and the AMS-4 is different depending on which telemetry software you use. It changed when we went from Teletrak to TeleView. I have a procedure that gives the settings needed. . Chuck Creamer Charles E. Creamer Health Physicist Tennessee Valley Authority Browns Ferry Nuclear Plant P.O. Box 2000 (Mail Stop NAB-1G-BFN) Decatur, Al. 35609-2000 Phone: 256-729-2983 Fax: 256-729-3101 Pager: 1-800-323-4853, pin 30-053 mailto:[email protected] <mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of MCCALL, CHARLES Sent: Wednesday, November 10, 2010 8:00 AM To: [email protected] Subject: Powernet: AMS-4 connected to MGP EXT's We are in the process of changing over to MGP EPD's and telemetry. Has anyone had any luck getting Thermo AMS-4's to work with MGP telemetry, specifically the EXT radios? The DRM-1 and the MGP EPD's work fine with Thermo Viewpoint but I can't get the AMS-4's to work. Charles McCall Health Physicist Ft. Calhoun Power Station Rad Eq Group 402-533-7165 [email protected] This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
