Palo Verde provides the following response:

The Refueling Water Rank (RWT) is limited to 60 Curies long half-life 
radionuclides (Cs-137, Co-60, Sr-90 and H-3).  This is based on having the tank 
walls fail and the maximum volume of the tank released to the groundwater and 
instantaneously reaching the regional aquifer nearest the site exclusion 
boundary.  The CST is expected to contain concentrations of radionuclides that 
yield a surface dose rate of 0.25 mrem/hr or less.

Chemistry performs regular sampling of both tanks to ensure that the contents 
do not exceed the limits for radioactive concentrations



From: [email protected] [mailto:[email protected]] On Behalf Of 
Orionhp
Sent: Wednesday, September 21, 2011 7:12 AM
To: [email protected]
Subject: Re: Powernet: FSAR requirements

I noticed that you have not gotten any responses to this question.  My answers 
are given below.  They apply to the now decommissioned Trojan reactor located 
in Oregon.
Tom Meek

On 9/7/2011 11:16 AM, SCHLAPKOHL, DANIEL wrote:

I have an action to change our FSAR for stored radioactivity in our CST and 
RWST tanks outside of the RCA. We currently have 0.5 and 10 mR/hr contact dose 
rate limits on these tanks. I would like to know the following;



What are your FSAR limits (dose rates or concentration levels), and how did you 
come up with these numbers?
            The FSAR limits were concentration of radioactive material based on 
the dose to a member of the public from drinking water downstream from the 
plant from the total release of the tank                 contents due to a 
rupture.  The dose limit to the public was used to back calculate the maximum 
concentration based on minimal dilution.



What is your process to monitor these tanks to make sure you comply with your 
FSAR requirements?
            There were no process monitors.  A sample was collected for 
analysis by chemistry.




 Thanks for your help,



Dan Schlapkohl

Supervisor, Radiological Operations

Grand Gulf Nuclear Station

601-437-6189

[email protected]<mailto:[email protected]>

--- NOTICE ---

This message is for the designated recipient only and may contain confidential, 
privileged or proprietary information.  If you have received it in error, 
please notify the sender immediately and delete the original and any copy or 
printout.  Unintended recipients are prohibited from making any other use of 
this e-mail.  Although we have taken reasonable precautions to ensure no 
viruses are present in this e-mail, we accept no liability for any loss or 
damage arising from the use of this e-mail or attachments, or for any delay or 
errors or omissions in the contents which result from e-mail transmission.

Reply via email to