Jerry, Salem has had good experiences with Master Lee as well. This summer we cleaned four WMHUT(s) and sealed pin hole leaks using their InstaCoat product to line the inside of the tanks and left it in place.
Alex Johns Salem-RPS 856-339-3909 [email protected]<mailto:[email protected]> ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, November 02, 2011 8:11 PM To: powernet Subject: Re: Powernet: Vendor to Decon our Waste Holdup Tank I would go to Master-Lee first. ________________________________ From: "Barber, Jerry" [[email protected]] Sent: 11/02/2011 06:38 PM AST To: "'[email protected]'" <[email protected]> Cc: "Hall, Steven" <[email protected]> Subject: Powernet: Vendor to Decon our Waste Holdup Tank Our 22,440 gallon Waste Holdup Tank has a significant buildup of radioactive sludge from many years of dedicated service. We would like to find a vendor who can successfully clean the sludge from the tank and help us dispose of the radioactive waste produced so that we can lower our dose rates in this part of the plant. Please provide me with names of vendors who have successfully performed similar services at other nuclear power plants. Thanks Jerry Barber Lead RC Specialist H.B. Robinson Nuclear Plant 843-857-1496 [email protected] ________________________________ The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message. ----------------------------------------- The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation.
