Palo Verde applies a correction factor From: [email protected] [mailto:[email protected]] On Behalf Of MCCALL, CHARLES Sent: Monday, September 24, 2012 11:09 AM To: [email protected] Subject: Powernet: Neutron surveys
How does your facility handle neutron surveys in areas that have different neutron energies (spent fuel storage, i/s the bio-shield, o/s the bio shield, etc.)? Do you have different calibrations for your neutron meter or do you apply a correction factor? Thanks Charles W. McCall Health physicist Rad Equipment Group Omaha Public Power District 9710 Power Lane, Blair NE 68008 402-533-7165 [email protected]<mailto:[email protected]> ________________________________ This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, or acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission.
